Jump to content
Froxlor Forum
  • 0

[solved] SASL error on MailServer-Setup


Gamerboy59

Question

Hello,

I'm currently experiencing some issues on my mailserver setup. It seems like there's a mistake in configuration but I can't figure out which part sucks. I get the following error message:

Jul 22 14:58:15 server postfix/smtpd[16170]: warning: SASL: Connect to private/auth failed: No such file or directory
Jul 22 14:58:15 server postfix/smtpd[16170]: fatal: no SASL authentication mechanisms
Jul 22 14:58:16 server postfix/master[15928]: warning: process /usr/lib/postfix/smtpd pid 16170 exit status 1
Jul 22 14:58:16 server postfix/master[15928]: warning: /usr/lib/postfix/smtpd: bad command startup -- throttling
How to fix it?

 

 

Thanks for your help. ;)

Link to comment
Share on other sites

11 answers to this question

Recommended Posts

## General Postfix configuration
# should be the default domain from your provider eg. "server100.provider.tld"
mydomain = server.my-domain.org

# should be different from $mydomain eg. "mail.$mydomain"
myhostname = mail.$mydomain

mydestination = $myhostname,
	$mydomain,
	localhost.$myhostname,
	localhost.$mydomain,
	localhost
mynetworks = 127.0.0.0/8
inet_interfaces = all
append_dot_mydomain = no
biff = no

# Postfix performance settings
default_destination_concurrency_limit = 20
local_destination_concurrency_limit = 2

# SMTPD Settings
smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
smtpd_helo_required = yes
smtpd_recipient_restrictions = permit_mynetworks,
	permit_sasl_authenticated,
	reject_unauth_destination,
	reject_unauth_pipelining,
	reject_non_fqdn_recipient
smtpd_sender_restrictions = permit_mynetworks,
	reject_sender_login_mismatch,
	permit_sasl_authenticated, 
	reject_unknown_helo_hostname, 
	reject_unknown_recipient_domain, 
	reject_unknown_sender_domain
smtpd_client_restrictions = permit_mynetworks,
	permit_sasl_authenticated,
	reject_unknown_client_hostname

# Postfix 2.10 requires this option. Postfix < 2.10 ignores this.
# The option is intentionally left empty.
smtpd_relay_restrictions = 

# Maximum size of Message in bytes (50MB)
message_size_limit = 52428800

## SASL Auth Settings
smtpd_sasl_auth_enable = yes
smtpd_sasl_local_domain = $myhostname
broken_sasl_auth_clients = yes
## Dovecot Settings for deliver, SASL Auth and virtual transport
smtpd_sasl_type = dovecot
dovecot_destination_recipient_limit = 1
smtpd_sasl_path = private/dovecot-auth

# Virtual delivery settings
virtual_mailbox_base = /var/customers/mail/
virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual_mailbox_maps.cf
virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual_mailbox_domains.cf
virtual_alias_maps = mysql:/etc/postfix/mysql-virtual_alias_maps.cf
smtpd_sender_login_maps = mysql:/etc/postfix/mysql-virtual_sender_permissions.cf
virtual_uid_maps = static:2000
virtual_gid_maps = static:2000

# Local delivery settings
local_transport = local
alias_maps = $alias_database

# Default Mailbox size, is set to 0 which means unlimited!
mailbox_size_limit = 0
virtual_mailbox_limit = 0

### TLS settings
###
## TLS for outgoing mails from the server to another server
#smtp_tls_security_level = may
#smtp_tls_note_starttls_offer = yes
## TLS for email client
#smtpd_tls_security_level = may
#smtpd_tls_cert_file = /etc/ssl/server/server.web-administer.de.pem
#smtpd_tls_key_file = $smtpd_tls_cert_file
#smtpd_tls_CAfile = /etc/ssl/certs/ca-certificates.crt
#smtpd_tls_loglevel = 1
#smtpd_tls_received_header = yes

debugger_command =
         PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
         ddd $daemon_directory/$process_name $process_id & sleep 5

chmod 0644, chown root:root

 

 

#
# Postfix master process configuration file.  For details on the format
# of the file, see the master(5) manual page (command: "man 5 master" or
# on-line: http://www.postfix.org/master.5.html).
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ==========================================================================
# service type  private unpriv  chroot  wakeup  maxproc command + args
#               (yes)   (yes)   (yes)   (never) (100)
# ==========================================================================
smtp      inet  n       -       -       -       -       smtpd
#smtp      inet  n       -       -       -       1       postscreen
#smtpd     pass  -       -       -       -       -       smtpd
#dnsblog   unix  -       -       -       -       0       dnsblog
#tlsproxy  unix  -       -       -       -       0       tlsproxy
#submission inet n       -       -       -       -       smtpd
#  -o syslog_name=postfix/submission
#  -o smtpd_tls_security_level=encrypt
#  -o smtpd_sasl_auth_enable=yes
#  -o smtpd_reject_unlisted_recipient=no
#  -o smtpd_client_restrictions=$mua_client_restrictions
#  -o smtpd_helo_restrictions=$mua_helo_restrictions
#  -o smtpd_sender_restrictions=$mua_sender_restrictions
#  -o smtpd_recipient_restrictions=
#  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
#  -o milter_macro_daemon_name=ORIGINATING
#smtps     inet  n       -       -       -       -       smtpd
#  -o syslog_name=postfix/smtps
#  -o smtpd_tls_wrappermode=yes
#  -o smtpd_sasl_auth_enable=yes
#  -o smtpd_reject_unlisted_recipient=no
#  -o smtpd_client_restrictions=$mua_client_restrictions
#  -o smtpd_helo_restrictions=$mua_helo_restrictions
#  -o smtpd_sender_restrictions=$mua_sender_restrictions
#  -o smtpd_recipient_restrictions=
#  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
#  -o milter_macro_daemon_name=ORIGINATING
#628       inet  n       -       -       -       -       qmqpd
pickup    unix  n       -       -       60      1       pickup
cleanup   unix  n       -       -       -       0       cleanup
qmgr      unix  n       -       n       300     1       qmgr
#qmgr     unix  n       -       n       300     1       oqmgr
tlsmgr    unix  -       -       -       1000?   1       tlsmgr
rewrite   unix  -       -       -       -       -       trivial-rewrite
bounce    unix  -       -       -       -       0       bounce
defer     unix  -       -       -       -       0       bounce
trace     unix  -       -       -       -       0       bounce
verify    unix  -       -       -       -       1       verify
flush     unix  n       -       -       1000?   0       flush
proxymap  unix  -       -       n       -       -       proxymap
proxywrite unix -       -       n       -       1       proxymap
smtp      unix  -       -       -       -       -       smtp
relay     unix  -       -       -       -       -       smtp
#       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq     unix  n       -       -       -       -       showq
error     unix  -       -       -       -       -       error
retry     unix  -       -       -       -       -       error
discard   unix  -       -       -       -       -       discard
local     unix  -       n       n       -       -       local
virtual   unix  -       n       n       -       -       virtual
lmtp      unix  -       -       -       -       -       lmtp
anvil     unix  -       -       -       -       1       anvil
scache    unix  -       -       -       -       1       scache
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent.  See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop  unix  -       n       n       -       -       pipe
  flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
#
# ====================================================================
#
# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
#
# Specify in cyrus.conf:
#   lmtp    cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
#
# Specify in main.cf one or more of the following:
#  mailbox_transport = lmtp:inet:localhost
#  virtual_transport = lmtp:inet:localhost
#
# ====================================================================
#
# Cyrus 2.1.5 (Amos Gouaux)
# Also specify in main.cf: cyrus_destination_recipient_limit=1
#
#cyrus     unix  -       n       n       -       -       pipe
#  user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
#
# ====================================================================
# Old example of delivery via Cyrus.
#
#old-cyrus unix  -       n       n       -       -       pipe
#  flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
#
# ====================================================================
#
# See the Postfix UUCP_README file for configuration details.
#
uucp      unix  -       n       n       -       -       pipe
  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
#
ifmail    unix  -       n       n       -       -       pipe
  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp     unix  -       n       n       -       -       pipe
  flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
scalemail-backend unix	-	n	n	-	2	pipe
  flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
mailman   unix  -       n       n       -       -       pipe
  flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
  ${nexthop} ${user}

# Add these lines to be able to use dovecot as delivery agent
# Dovecot LDA
dovecot	  unix	-	n	n	-	-	pipe
	flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -c /etc/dovecot/dovecot.conf -d ${recipient}

chmod 0644, chown root:root
Link to comment
Share on other sites

Sorry i'm not responding ASAP...some people may have a life and work to do...

 

Just re-check that you have used the froxlor config-templates 100% and restart all services. Because your postfix configs do not look like the ones we provide.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...