-
Similar Content
-
By thunfischbaum
Hi everyone,
just a little problem here. I have severa domains registered on my froxlor installation and a different hostname of course. So let's say domain1.de is my hostname. The second domain, which is used by a customer is called domain2.de . When I view the mail.log I am not able to find my connection request. I do only see the bruteforce bots with example@domain1.de connecting. But any example@domain2.de request is not getting forwareded. I did configure the installation accordingdly with the provided templates.
Best regards,
thunfischbaum
-
By thunfischbaum
Hi everyone,
I'm running a Debian 10 Buster Server with PHP7.3 installed. The PHP7.3 update is the new component in the system. since then, I can't find any Mailboxes. There are no folders in the var/customers/mail/[customer] directory.
If you take look at the Screenshot, you see, that the E-Mail adress is existent in Froxlor.
Mail Bounce
Mail Log
If I missed a log, please let me know, so I can attach it
Best regards,
thunfischbaum
-
By irisdina
Warning, this is not an official guide!!!
1.
sudo mv /etc/apt/source.list /etc/apt/source.list.bak 1a. Create new Source.list
sudo nano /etc/apt/source.list 1b. insert (for Debian Stretch)
1.2B (for Ubuntu Cosmic)
1c.
sudo apt update && sudo apt dist-upgrade && sudo apt autoclean && sudo apt autoremove 1d.
sudo apt install curl wget apt-transport-https dirmngr git software-properties-common Now you can start setting up your server
2. MariaDB install
Warning use sudo command für this install!
sudo apt install mariadb-server mariadb-client 2a. MariaDB 10.3 Workround (Optional)
3. nginx install
sudo apt install nginx 3a.
mkdir /etc/nginx/sites-available mkdir /etc/nginx/sites-enabled 3b. nano /etc/nginx/nginx.conf
4. PHP install
sudo apt-get -y install php7.3-fpm php7.3-mysql php7.3-curl php7.3-gd php7.3-intl php-pear php-imagick php7.3-imap php-memcache php7.3-pspell php7.3-recode php7.3-sqlite3 php7.3-tidy php7.3-xmlrpc php7.3-xsl php7.3-mbstring php-gettext php7.3-mysql php7.3-curl php7.3-gd php7.3-intl php-pear php-imagick php7.3-imap php-memcache php7.3-memcached php7.3-pspell php7.3-recode php7.3-sqlite3 php7.3-tidy php7.3-xmlrpc php7.3-xsl php7.3-mbstring php-gettext php7.3-fpm php7.3-cli php7.3-cgi php-bcmath php-zip php7.3-fpm php7.3-curl php7.3-gd php7.3-mysql php7.3-mbstring php7.3-zip php7.3-bcmath zip unzip 4a.
sudo service nginx restart sudo service php7.3-fpm restart Froxlor install
There are two ways to get Froxlor. Stable (wget) and Beta Build (git / Master)
Stable Version
1.
cd /var/www/html/ 1a.
sudo https://files.froxlor.org/releases/froxlor-latest.tar.gz && sudo tar xzfv froxlor-latest.tar.gz or
Git Version (Beta Version)
sudo git clone https://github.com/Froxlor/Froxlor.git && sudo chown -HR www-data:www-data Froxlor/ sudo apt install composer su - www-data -s /bin/bash cd /var/www/html/Froxlor/ 1a(2). Composer install in your Froxlor directory
composer install --no-dev 1b.
sudo chown -R www-data:www-data Froxlor/ Set up Froxlor
2. Open Your Browser
2a.
http://your IP or Hostname/Froxlor
Install Froxlor finish
3d. Move userdata (Optional)
sudo mv /tmp/userdata.inc.php /var/www/html/Froxlor/lib/ 2c.
sudo rm /etc/nginx/site-enable/default don't restart nginx!
Froxlor Settings
1. Cronjob
sudo nano /etc/cron.d/froxlor insert
# # Set PATH, otherwise restart-scripts won't find start-stop-daemon # PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin # # Regular cron jobs for the froxlor package # # Please check that all following paths are correct # */5 * * * * root /usr/bin/nice -n 5 /usr/bin/php -q /var/www/html/Froxlor/scripts/froxlor_master_cronjob.php sudo chmod 0640 "/etc/cron.d/froxlor" sudo chown root:0 "/etc/cron.d/froxlor" sudo service cron restart 2. Nginx PHP Backend
Settings > Webserver settings > Nginx PHP backend
from 127.0.0.1:8888 to unix:/run/php/php7.3-fpm.sock
3.
sudo mkdir -p /var/customers/webs/ sudo mkdir -p /var/customers/logs/ sudo mkdir -p /var/customers/tmp sudo chmod 1777 /var/customers/tmp sudo service nginx restart 4. IPs and Ports > Add IP/Port
2a(1), SSL Port
Wait 5min for Autimatic Start Froxlor's cronjob or start the cronjob manually
sudo php /var/www/html/Froxlor/scripts/froxlor_master_cronjob.php --force --debug Optional
PHP-FPM activate
1. User/Group add
sudo adduser froxlorlocal --disabled-password --no-create-home && sudo usermod -a -G www-data froxlorlocal 2. libnss-extrausers install
sudo apt install nscd libnss-extrausers sudo mkdir -p /var/lib/extrausers sudo touch /var/lib/extrausers/{passwd,group,shadow} sudo mv "/etc/nsswitch.conf" "/etc/nsswitch.conf.frx.bak" sudo nano /etc/nsswitch.conf # Make sure that `passwd`, `group` and `shadow` have mysql in their lines # You should place mysql at the end, so that it is queried after the other mechanisams # passwd: compat extrausers group: compat extrausers shadow: compat extrausers hosts: files dns networks: files dns services: db files protocols: db files rpc: db files ethers: db files netmasks: files netgroup: files bootparams: files automount: files aliases: files sudo service nscd restart sudo nscd --invalidate=group 2a. Settings > System settings > Activate > Use libnss-extrausers instead of libnss-mysql
3. Settings > PHP-FPM > Activated:
Change from NO to YES
3a. PHP-FPM versions
Change > php-fpm restart command:
service php7.3-fpm restart and
Configuration directory of php-fpm: > to
/etc/php/7.3/fpm/pool.d/ 3b. Settings > Froxlor VirtualHost settings > Activate > Enable PHP-FPM for the Froxlor vHost
3c.
sudo chown -HR froxlorlocal:froxlorlocal /var/www/html/Froxlor SSL / Let's Encrypt activate
1.
sudo apt install certbot 1a.
sudo mkdir /etc/nginx/ssl && cd /etc/nginx/ssl 1b. Create SSL File
sudo openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout /etc/nginx/ssl/nginx.key -out /etc/nginx/ssl/nginx.crt 1c.
sudo nano /etc/nginx/acme.conf insert
location /.well-known/acme-challenge { alias /var/www/html/Froxlor/.well-known/acme-challenge; location ~ /.well-known/acme-challenge/(.*) { default_type text/plain; } }
2. Open your Froxlor Panel
Settings> SSL > Activated:
Change from NO to YES
2a. Settings > SSL > Settings
Change your path from your certificate / Keyfile
Path to the SSL certificate
insert
/etc/nginx/ssl/nginx.crt Path to the SSL Keyfile
insert
/etc/nginx/ssl/nginx.key 2b. Settings > SSL > Settings
Activate > Enable Let's Encrypt
Change Path to the acme.conf snippet to >
/etc/nginx/acme.conf 2c. Activate on Settings > Froxlor VirtualHost settings
- Enable Let's Encrypt for the froxlor vhost
- Enable SSL-redirect for the froxlor vhost
- HTTP Strict Transport Security (HSTS)
- Include HSTS for any subdomain
2d. Activated HTTP2 Support on > Settings > Nginx
-
By Guest
in der config-Datei steht
was für eine valid e-mail Adresse muss das sein ? diese root@frx.beispiel.de ist ja bisher nicht eingerichtet und packt systemmeldungen in ein verzeichnis
sollte dort also eine mailadresse rein, die auf einem anderen Server liegt und Mails empfängt, oder sollte/könnte diese root@beispiel.de im froxlor eingerichtet sein ?
-
By Randall Newman
I have been in the process of installing Froxlor in a Google Cloud Instance. All the errors I have encountered I was able to fix them by searching on the web, but this one I couldn't find a solution for the past two hours. Simply I need help solving this error.?
-
Maildir wird autom. bei Erstellung von Mailadresse angelegt, aber Pfad ist falsch, siehe
/var/customers/mail/var/customers/mail/[CUSTOMER]/[DOMAIN.TLD]/[MAILBOX]
"var/customers/mail" ist doppelt.
Bitte um Info welcher Prozess dieses Verzeichnis anlegt, bzw. wo der Fehler liegt.
Share this post
Link to post
Share on other sites