Jump to content
Froxlor Forum
  • 0
MasterOfDeath

froxlor fgcid help needed

Question

Hello all,

I deleted my old debian 7 and updated everything to new versions. However some problems exists and i cannot access my webpages.

I did everything according to wiki pages and froxlor configurations but still some errors exists in below and not showing pages properly - only froxlor default page shown

● apache2.service - The Apache HTTP Server
   Loaded: loaded (/lib/systemd/system/apache2.service; enabled; vendor preset: enabled)
   Active: active (running) (Result: exit-code) since Tue 2019-04-16 23:48:14 +03; 53min ago
  Process: 4850 ExecStop=/usr/sbin/apachectl stop (code=exited, status=0/SUCCESS)
  Process: 5958 ExecReload=/usr/sbin/apachectl graceful (code=exited, status=1/FAILURE)
  Process: 4858 ExecStart=/usr/sbin/apachectl start (code=exited, status=0/SUCCESS)
 Main PID: 4862 (apache2)
    Tasks: 13 (limit: 4915)
   CGroup: /system.slice/apache2.service
           ├─4862 /usr/sbin/apache2 -k start
           ├─4863 /usr/sbin/apache2 -k start
           ├─4864 /usr/sbin/apache2 -k start
           ├─4867 /usr/sbin/apache2 -k start
           ├─4868 /usr/sbin/apache2 -k start
           ├─4869 /usr/bin/php-cgi -c /var/www/php-fcgi-scripts/froxlor.panel/v22000.local/
           ├─4874 /usr/sbin/apache2 -k start
           ├─4877 /usr/sbin/apache2 -k start
           ├─4878 /usr/sbin/apache2 -k start
           ├─4879 /usr/sbin/apache2 -k start
           ├─4880 /usr/sbin/apache2 -k start
           ├─4940 /usr/sbin/apache2 -k start
           └─5740 /usr/sbin/apache2 -k start

Apr 16 23:48:14 v2201412723521843 systemd[1]: Started The Apache HTTP Server.
Apr 17 00:33:51 v2201412723521843 Froxlor[4869]: [Administrator Action admin] [information] rebuild configfiles due to changed setting
Apr 17 00:34:45 v2201412723521843 Froxlor[4869]: [Administrator Action admin] [information] added user 'kaptan'
Apr 17 00:35:16 v2201412723521843 Froxlor[4869]: [Administrator Action admin] [information] added domain 'kaptan.xyz'
Apr 17 00:36:28 v2201412723521843 systemd[1]: Reloading The Apache HTTP Server.
Apr 17 00:36:29 v2201412723521843 apachectl[5958]: AH00543: apache2: bad user name kaptan
Apr 17 00:36:29 v2201412723521843 apachectl[5958]: Action 'graceful' failed.
Apr 17 00:36:29 v2201412723521843 apachectl[5958]: The Apache error log may have more information.
Apr 17 00:36:29 v2201412723521843 systemd[1]: apache2.service: Control process exited, code=exited status=1
Apr 17 00:36:29 v2201412723521843 systemd[1]: Reload failed for The Apache HTTP Server.
ls -al /var/customers/webs/
total 1494612
drwxr-xr-x 9 root  root        4096 Apr 17 00:36 .
drwxr-xr-x 6 root  root        4096 Apr 13 11:00 ..
-rw-r--r-- 1 root  root  1530439729 Apr 12 20:09 all_backup.zip
drwxr-x--- 3 10009 10009       4096 Apr 17 00:39 kaptan
drwxr-x--- 7 10002 10002       4096 Apr 13 18:41 kaptans
drwxr-xr-x 8 root  root        4096 Apr 13 18:55 NOTactiveWEB
drwxr-x--- 3 10007 10007       4096 Apr 14 19:24 test

 

Share this post


Link to post
Share on other sites

6 answers to this question

Recommended Posts

  • 0

forgot to setup/configure libnss-mysql or libnss-extrausers?

Share this post


Link to post
Share on other sites
  • 0
7 minutes ago, MasterOfDeath said:

libnss-extrausers configured as per direction in system>configuration

and also activated explicitly in the settings? Froxlor needs to know whether you are using libnss-extrausers or not...

Share this post


Link to post
Share on other sites
  • 0
31 minutes ago, d00p said:

and also activated explicitly in the settings? Froxlor needs to know whether you are using libnss-extrausers or not...

just activated from system>settings>system settings

 

fgcid0.JPG

fgcid1.JPG

fgcid2.JPG

fgcid3.JPG

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By tmuecksch
      Guten Tag,
      ich habe einen Debian 9 Server mit Froxlor und Apache2 am laufen. Wenn ich mit dem Kunden FTP Zugang Dateien hochlade haben diese Ordnungsgemäß das ownership 10000:10000.
      Wenn jedoch in der PHP-Weboberfläche eine Datei hochgeladen wird, wird diese mit dem ownership www-data:www-data hochgeladen. Liegt hier ein Konfigurationsfehler vor oder ist das Verhalten sogar so gewünscht? Ich kann den Fehler leider nicht entdecken. Das Problem ist nur, dass das PHP-Script dann eine Permission Denied Fehlermeldung wirft, wenn versucht wird die Datei zu lesen.
       
      Liebe Grüße
      tmuecksch
    • By veto
      have now successfully a default froxlor + apache2 + mod_apache + php7  running.
      the problem is now that some php webapps are not supporting php7.
      i read the debian9 can run multiple php version 
      and i installed php 5.6 with
      apt-get install apt-transport-https curl https://packages.sury.org/php/apt.gpg | apt-key add - echo 'deb https://packages.sury.org/php/ stretch main' > /etc/apt/sources.list.d/deb.sury.org.list apt-get update https://pehapkari.cz/blog/2017/03/27/multiple-php-versions-the-easy-way/
      the manual is for nginx.
      i want now to run all virtual host with the default mod_php apache2 setting from froxlor but for some virtualhosts
      use another php handler like  php5.6-cgi or php5.6-fmp.
      there so many different setting possible and with the decaying search quality it difficult to find a staring point
       
       
       




×
×
  • Create New...