ich bin jetzt mit meinem vServer ganz frisch auf froxlor umgestiegen.
Kenne mich also noch nicht so gut damit aus.
Mit Confixx ging das immer alles ganz gut aber hier
Nun gut kommen wir zu meinem Problem. Ich habe mir ein comodo Zertifikat besorgt.
Habe nun also meine zuvor erstelle .crt + .key Datei sowie von comodo eine weitere .crt Datei und eine .ca-bundle Datei.
Nun w?rde ich dieses gern f?r eine meiner Domains einrichten.
Habe dazu einfach im IP/Port Bereich eine neue IP (die alte nur diesmal Port 443) erstellt.
Dort und bei den SSL Einstellungen habe ich nun folgende Felder erg?nzt:
Pfad zum Zertifikat: mein.key
Pfad zu der SSL Schl?sseldatei: comodo.crt
Pfad zu dem SSL CA Zertifikat: comodo.ca-bundle
Pfad zu dem SSL CertificateChainFile:
Danach habe ich gemerkt, dass die ca-bundle Datei in das untere Feld "Pfad zu dem SSL CertificateChainFile" geh?rt.
Doch wenn ich den Pfad dort angebe und speichere, kommt dieser Fehler:
Given filename for function makeCorrectFile is empty. This is very dangerous and should not happen. Please inform the Froxlor team about this issue so they can fix it.
Kann mir jemand helfen?
Was mache ich falsch?
Ist sonst alles richtig eingestellt?
Wenn ich via ssh einen apache reload bzw restart machen will, kommt folgender fehler:
root@xxx:~# /etc/init.d/apache2 reload
Syntax error on line 9 of /etc/apache2/sites-enabled/10_froxlor_ipandport_88.198.183.190.443.conf:
Invalid command 'SSLEngine', perhaps misspelled or defined by a module not included in the server configuration
Question
km65
Hallo liebe Community,
ich bin jetzt mit meinem vServer ganz frisch auf froxlor umgestiegen.
Kenne mich also noch nicht so gut damit aus.
Mit Confixx ging das immer alles ganz gut aber hier
Nun gut kommen wir zu meinem Problem. Ich habe mir ein comodo Zertifikat besorgt.
Habe nun also meine zuvor erstelle .crt + .key Datei sowie von comodo eine weitere .crt Datei und eine .ca-bundle Datei.
Nun w?rde ich dieses gern f?r eine meiner Domains einrichten.
Habe dazu einfach im IP/Port Bereich eine neue IP (die alte nur diesmal Port 443) erstellt.
Dort und bei den SSL Einstellungen habe ich nun folgende Felder erg?nzt:
Pfad zum Zertifikat: mein.key
Pfad zu der SSL Schl?sseldatei: comodo.crt
Pfad zu dem SSL CA Zertifikat: comodo.ca-bundle
Pfad zu dem SSL CertificateChainFile:
Danach habe ich gemerkt, dass die ca-bundle Datei in das untere Feld "Pfad zu dem SSL CertificateChainFile" geh?rt.
Doch wenn ich den Pfad dort angebe und speichere, kommt dieser Fehler:
Given filename for function makeCorrectFile is empty. This is very dangerous and should not happen. Please inform the Froxlor team about this issue so they can fix it.
Kann mir jemand helfen?
Was mache ich falsch?
Ist sonst alles richtig eingestellt?
Wenn ich via ssh einen apache reload bzw restart machen will, kommt folgender fehler:
Danke
MfG
Tobi
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.