Guten Morgen,
die Pfade sehen alle gut aus also stimmig. Ich bin mir auch recht sicher das es an mir und nicht an dem System liegt. das ist meine main.cf
# See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
# is /etc/mailname.
#myorigin = /etc/mailname
smtpd_banner = $myhostname ESMTP $mail_name (@@DISTRO@@)
biff = no
# appending .domain is the MUA's job.
append_dot_mydomain = no
# Uncomment the next line to generate "delayed mail" warnings
#delay_warning_time = 4h
readme_directory = no
# See http://www.postfix.org/COMPATIBILITY_README.html -- default to 2 on
# fresh installs.
compatibility_level = 2
# INTERNET HOST AND DOMAIN NAMES
#
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#
# Froxlor Note: $myhostname can and should be the same as $mydomain as long as
# you don't intend to send mail to it (it will be considered local, not virtual)
# for the case of a subdomain, $mydomain *must* be equal to $myhostname,
# otherwise you cannot use the main domain for virtual transport.
# also check the note about $mydomain below.
myhostname = mail.meine_domain.de
#myhostname = virtual.domain.tld
# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#
# Froxlor Note: We are using a default here but that may or may not make sense,
# depending on your dns configuration, please check yourself.
# FQDN from Froxlor
mydomain = hosting.meine_domain.de
#mydestination = $myhostname, localhost.$mydomain, localhost
mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
# mail.$mydomain, www.$mydomain, ftp.$mydomain
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
#
unknown_local_recipient_reject_code = 550
# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception: delivery for root is done as $default_user.
#
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
#
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
#
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
#
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#
mailbox_command = /usr/lib/dovecot/deliver
#mailbox_command = /usr/bin/procmail -a "$EXTENSION"
# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
#
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
#
debugger_command =
PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
ddd $daemon_directory/$process_name $process_id & sleep 5
inet_protocols = ipv4
smtpd_helo_required = yes
smtpd_recipient_restrictions = permit_mynetworks,
permit_sasl_authenticated,
reject_unauth_destination,
reject_unauth_pipelining,
reject_non_fqdn_recipient
smtpd_sender_restrictions = permit_mynetworks,
reject_sender_login_mismatch,
permit_sasl_authenticated,
reject_unknown_helo_hostname,
reject_unknown_recipient_domain,
reject_unknown_sender_domain
smtpd_client_restrictions = permit_mynetworks,
permit_sasl_authenticated,
reject_unknown_client_hostname
# Postfix 2.10 requires this option. Postfix < 2.10 ignores this.
# The option is intentionally left empty.
smtpd_relay_restrictions =
# Maximum size of Message in bytes (50MB)
message_size_limit = 52428800
## SASL Auth Settings
smtpd_sasl_auth_enable = yes
smtpd_sasl_local_domain = $myhostname
broken_sasl_auth_clients = yes
## Dovecot Settings for deliver, SASL Auth and virtual transport
smtpd_sasl_type = dovecot
virtual_transport = dovecot
dovecot_destination_recipient_limit = 1
smtpd_sasl_path = private/auth
# Virtual delivery settings
virtual_mailbox_base = /
virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual_mailbox_maps.cf
virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual_mailbox_domains.cf
virtual_alias_maps = mysql:/etc/postfix/mysql-virtual_alias_maps.cf
smtpd_sender_login_maps = mysql:/etc/postfix/mysql-virtual_sender_permissions.cf
virtual_uid_maps = static:2000
virtual_gid_maps = static:2000
# Local delivery settings
local_transport = local
alias_maps = $alias_database
# Default Mailbox size, is set to 0 which means unlimited!
mailbox_size_limit = 0
virtual_mailbox_limit = 0
### TLS settings
###
## TLS for outgoing mails from the server to another server
#smtp_tls_security_level = may
#smtp_tls_note_starttls_offer = yes
## TLS for incoming connections (clients or other mail servers)
#smtpd_tls_security_level = may
#smtpd_tls_cert_file = /etc/ssl/server/hosting.meine_domain.de.pem
#smtpd_tls_key_file = $smtpd_tls_cert_file
#smtpd_tls_CAfile = /etc/ssl/certs/ca-certificates.crt
#smtpd_tls_loglevel = 1
#smtpd_tls_received_header = yes
folgendes habe ich unten ans ende eingefügt
#TLS Support
smtpd_tls_auth_only = no
smtp_use_tls = yes
smtpd_use_tls = yes
smtp_tls_note_starttls_offer = yes
smtpd_tls_key_file = /etc/ssl/froxlor-custom/mail.meine_domain.de.key
smtpd_tls_cert_file = /etc/ssl/froxlor-custom/mail.meine_domain.de.crt
smtpd_tls_CAfile = /etc/ssl/froxlor-custom/mail.meine_domain.de_CA.pem
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
tls_random_source = dev:/dev/urandom
postfix restart
mehr habe ich nicht getan.
Ich bin für jede Hilfe dankbar.