Installation und Konfiguration funktioniert problemlos.
Alle Punkte Konfiguration wurden durchgef?hrt.
Cron's werden auch ausgef?hrt.
Realtime Froxloer ?ber xinetd funktioniert auch.
Wenn ich aber einen Kunden anlege, bekomme ich immer nur folgende Fehlermeldung:
Forbidden
You don't have permission to access / on this server.
im Log f?r den Kunden erscheint dann immer:
[sat Jun 05 15:43:32 2010] [crit] [client IP] (13)Permission denied: /var/customers/.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable
apache2.conf sieht wie folgt aus:
#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.2/ for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log"
# with ServerRoot set to "" will be interpreted by the
# server as "//var/log/apache2/foo.log".
#
### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/etc/apache2"
#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
#<IfModule !mpm_winnt.c>
#<IfModule !mpm_netware.c>
LockFile /var/lock/apache2/accept.lock
#</IfModule>
#</IfModule>
#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15
##
## Server-Pool Size Regulation (MPM specific)
##
# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_prefork_module>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxClients 150
MaxRequestsPerChild 0
</IfModule>
# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_worker_module>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
# These need to be set in /etc/apache2/envvars
User www-data
Group www-data
#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
#
AccessFileName .htaccess
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain
#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/apache2/error.log
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
# Include module configuration:
Include /etc/apache2/mods-enabled/*.load
Include /etc/apache2/mods-enabled/*.conf
# Include all the user configurations:
Include /etc/apache2/httpd.conf
# Include ports listing
Include /etc/apache2/ports.conf
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
#
# Define an access log for VirtualHosts that don't define their own logfile
CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#
#
# Putting this all together, we can internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
#
# Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /usr/share/apache2/error/include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis. The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
#
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation. To activate them, uncomment the following 30 lines.
# Alias /error/ "/usr/share/apache2/error/"
#
# <Directory "/usr/share/apache2/error">
# AllowOverride None
# Options IncludesNoExec
# AddOutputFilter Includes html
# AddHandler type-map var
# Order allow,deny
# Allow from all
# LanguagePriority en cs de es fr it nl sv pt-br ro
# ForceLanguagePriority Prefer Fallback
# </Directory>
#
# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
# ErrorDocument 410 /error/HTTP_GONE.html.var
# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
# ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.
# Include generic snippets of statements
Include /etc/apache2/conf.d/
# Include the virtual host configurations:
Include /etc/apache2/sites-enabled/
httpd.conf ist leer.
ports.conf
# If you just change the port or add more ports here, you will likely also
# have to change the VirtualHost statement in
# /etc/apache2/sites-enabled/000-default
# This is also true if you have upgraded from before 2.2.9-3 (i.e. from
# Debian etch). See /usr/share/doc/apache2.2-common/NEWS.Debian.gz and
# README.Debian.gz
NameVirtualHost *:80
Listen 80
<IfModule mod_ssl.c>
# SSL name based virtual hosts are not yet supported, therefore no
# NameVirtualHost statement here
Listen 443
</IfModule>
/etc/apache2/sites-enabled/000-default
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /var/www/
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory /var/www/>
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
allow from all
</Directory>
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
<Directory "/usr/lib/cgi-bin">
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
Order allow,deny
Allow from all
</Directory>
ErrorLog /var/log/apache2/error.log
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
CustomLog /var/log/apache2/access.log combined
Alias /doc/ "/usr/share/doc/"
<Directory "/usr/share/doc/">
Options Indexes MultiViews FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
Allow from 127.0.0.0/255.0.0.0 ::1/128
</Directory>
</VirtualHost>
# 05_froxlor_dirfix_nofcgid.conf
# Created 05.06.2010 16:35
# Do NOT manually edit this file, all changes will be deleted after the next domain change at the panel.
<Directory "/var/customers/webs/">
Order allow,deny
allow from all
</Directory>
# 10_froxlor_ipandport__0.0.0.0.80.conf
# Created 05.06.2010 16:35
# Do NOT manually edit this file, all changes will be deleted after the next domain change at the panel.
NameVirtualHost 0.0.0.0:80
<VirtualHost 0.0.0.0:80>
DocumentRoot "/var/www/"
ServerName froxlor.domain.tld
</VirtualHost>
# 21_froxlor_normal_vhost_kundendomain.tld.conf
# Created 05.06.2010 16:35
# Do NOT manually edit this file, all changes will be deleted after the next domain change at the panel.
# Domain ID: 10 - CustomerID: 3 - CustomerLogin: Kundenname
<VirtualHost 0.0.0.0:80>
ServerName domain.tld
ServerAlias *.kundendomain.tld
ServerAdmin mail@kundendomain.tld
DocumentRoot "/var/customers/webs/Kundenname/kundendomain.tld/"
php_admin_value open_basedir "/var/customers/webs/Kundenname/kundendomain.tld/:/tmp/"
php_admin_flag safe_mode On
Alias /awstats "/var/customers/webs/Kundenname/awstats/domain.tld"
ErrorLog "/var/customers/logs/Kundenname-error.log"
CustomLog "/var/customers/logs/Kundenname-access.log" combined
</VirtualHost>
apache2 -S gibt folgendes aus:
VirtualHost configuration:
0.0.0.0:80 is a NameVirtualHost
default server froxlor.domain.tld (/etc/apache2/sites-enabled/10_froxlor_ipandport_0.0.0.0.80.conf:6)
port 80 namevhost froxlor.domain.tld (/etc/apache2/sites-enabled/10_froxlor_ipandport_0.0.0.0.80.conf:6)
port 80 namevhost fernando.domain.tld (/etc/apache2/sites-enabled/21_froxlor_normal_vhost_Kundenname.domain.tld.conf:6)
port 80 namevhost kundendomain.tld (/etc/apache2/sites-enabled/21_froxlor_normal_vhost_kundendomain.tld.conf:6)
wildcard NameVirtualHosts and _default_ servers:
*:80 is a NameVirtualHost
default server static.0.0.0.0.clients.your-server.de (/etc/apache2/sites-enabled/000-default:1)
port 80 namevhost static.0.0.0.0.clients.your-server.de (/etc/apache2/sites-enabled/000-default:1)
Syntax OK
Hoffe hierbei kann mir jemand helfen ... dreh bald am rad, da ich nicht rausfinde an was es liegt, habs jetzt bestimmt schon alle Einstellungen in zig Kombinationen durchgemacht, schon unz?hliche mal komplett neu ausfgesetzt, unterschiedliche Anleitungen verwendet, zig Tips auch hier aus dem Forum ausprobiert, und bekomm es trotzdem einfach nicht hin.
Ahh fast vergessen IPs und Ports ist gerade so eingestellt:
IP : Port Listen NameVirtualHost vHost-Container Specialsettings ServerName SSL
0.0.0.0:80 Nein Ja Ja Nein Ja Nein
Question
notimplementedyet
Hallo ich hab auf einem Debian Lenny System Froxlor 0.9.8 wie in dieser Anleitung beschrieben installiert:
http://faq.filoo.de/content/19/23/de/wie-installiere-ich-froxlor-auf-einem-rootserver-mit-debian.html
hab auch schon diese Anleitung ausprobiert:
http://www.debianroot.de/server/server-management-mit-froxlor-dem-syscp-fork-1190.html
leider immer mit dem selben Ergebniss... :/
Installation und Konfiguration funktioniert problemlos.
Alle Punkte Konfiguration wurden durchgef?hrt.
Cron's werden auch ausgef?hrt.
Realtime Froxloer ?ber xinetd funktioniert auch.
Wenn ich aber einen Kunden anlege, bekomme ich immer nur folgende Fehlermeldung:
Forbidden
You don't have permission to access / on this server.
im Log f?r den Kunden erscheint dann immer:
apache2.conf sieht wie folgt aus:
httpd.conf ist leer.
ports.conf
/etc/apache2/sites-enabled/000-default
/etc/apache2/sites-enabled/05_froxlor_dirfix_nofcgid.conf
/etc/apache2/sites-enabled/05_froxlor_ipandport_0.0.0.0.80.conf
Domainfile der Kunden Domain
/etc/apache2/sites-enabled/21_froxlor_normal_vhost_kundendomain.tld.conf
apache2 -S gibt folgendes aus:
Hoffe hierbei kann mir jemand helfen ... dreh bald am rad, da ich nicht rausfinde an was es liegt, habs jetzt bestimmt schon alle Einstellungen in zig Kombinationen durchgemacht, schon unz?hliche mal komplett neu ausfgesetzt, unterschiedliche Anleitungen verwendet, zig Tips auch hier aus dem Forum ausprobiert, und bekomm es trotzdem einfach nicht hin.
Ahh fast vergessen IPs und Ports ist gerade so eingestellt:
Kind regards
notimplementedyet
Link to comment
Share on other sites
11 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.