ich habe gerade eine Froxlor Installation auf nem Debian9 minimal System eingerichtet.
Die Initialeinrichtung lief durch und ich konnte einen Kunden anlegen.
Ordner wurden alle erstellt etc. soweit so gut.
Jetzt kam ich zum Thema php-fpm und extrausers.
Ich vermute, dass ich irgendwo etwas übersehen habe, bin aber der Meinung, dass ich die Konfiguration auch komplett erledigt hab -.-
Wenn ich nun versuche, den Apache neuzustarten, gibts folgenden Fehler:
● apache2.service - The Apache HTTP Server
Loaded: loaded (/lib/systemd/system/apache2.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Mon 2019-12-30 18:16:59 CET; 10s ago
Process: 26674 ExecStart=/usr/sbin/apachectl start (code=exited, status=1/FAILURE)
Main PID: 17550 (code=exited, status=0/SUCCESS)
Dec 30 18:16:59 v220191219559105492 systemd[1]: Starting The Apache HTTP Server... Dec 30 18:16:59 v220191219559105492 apachectl[26674]: AH00543: apache2: bad user name meinuser
Dec 30 18:16:59 v220191219559105492 apachectl[26674]: Action 'start' failed.
Dec 30 18:16:59 v220191219559105492 apachectl[26674]: The Apache error log may have more information.
Dec 30 18:16:59 v220191219559105492 systemd[1]: apache2.service: Control process exited, code=exited status=1
Dec 30 18:16:59 v220191219559105492 systemd[1]: Failed to start The Apache HTTP Server.
Dec 30 18:16:59 v220191219559105492 systemd[1]: apache2.service: Unit entered failed state.
Dec 30 18:16:59 v220191219559105492 systemd[1]: apache2.service: Failed with result 'exit-code'.
Beim Startversuch von php-fpm folgenden:
Dec 30 18:08:35 v220191219559105492 systemd[1]: Starting The PHP 7.4 FastCGI Process Manager... Dec 30 18:08:35 v220191219559105492 php-fpm7.4[26235]: [30-Dec-2019 18:08:35] ERROR: [pool meinPool] cannot get uid for user 'meinuser'
Dec 30 18:08:35 v220191219559105492 php-fpm7.4[26235]: [30-Dec-2019 18:08:35] ERROR: FPM initialization failed
Dec 30 18:08:35 v220191219559105492 systemd[1]: php7.4-fpm.service: Main process exited, code=exited, status=78/n/a
Dec 30 18:08:35 v220191219559105492 systemd[1]: Failed to start The PHP 7.4 FastCGI Process Manager.
Dec 30 18:08:35 v220191219559105492 systemd[1]: php7.4-fpm.service: Unit entered failed state.
Dec 30 18:08:35 v220191219559105492 systemd[1]: php7.4-fpm.service: Failed with result 'exit-code'.
Den Cronjob habe ich ebenfalls laufen lassen, bringt aktuell folgendes Ergebnis:
[information] TasksCron: Searching for tasks to do
[information] TasksCron: Task10 started - setting filesystem quota
sh: 1: /usr/sbin/repquota: not found
[information] Task4 started - Rebuilding froxlor_bind.conf
[information] Cleaning dns zone files from /etc/bind/domains/
[debug] domId domain ismainbutsubto parent domain list of child domain ids
[debug] none meinHost 0 -
[information] `/etc/bind/domains/meinHost.zone` written
[debug] Generating dns config for meinHost
[information] froxlor_bind.conf written
[information] Bind daemon reloaded
[information] Task4 finished
[information] apache::createIpPort: creating ip/port settings for serverIp:80
[notice] serverIp:80 :: namevirtualhost-statement no longer needed for apache-2.4
[debug] serverIp:80 :: inserted vhostcontainer
[information] apache::createVirtualHosts: creating vhost container for domain 1, customer meinUser chown: invalid user: ‘meinUser:meinUser’
[information] apache::writeConfigs: rebuilding /etc/apache2/sites-enabled/
[information] apache::writeConfigs: rebuilding /etc/apache2/htpasswd/
[information] apache::writeConfigs: rebuilding /etc/apache2/sites-enabled/
[information] Froxlor\Cron\Http\ApacheFcgi::reload: running service php7.4-fpm restart
Job for php7.4-fpm.service failed because the control process exited with error code.
See "systemctl status php7.4-fpm.service" and "journalctl -xe" for details.
[information] Froxlor\Cron\Http\ApacheFcgi::reload: reloading Froxlor\Cron\Http\ApacheFcgi
apache2.service is not active, cannot reload.
[notice] Checking system's last guid
Dort sieht man, dass es den User nicht gibt - aber ich hab keine Ahnung, wie ich den anlegen lasse - hätte vermutet, dass Froxlor den Usernamen aus der mySql DB ausliest und einen lokalen User anlegt.
Vielleicht kann mir ja wer helfen - Google kann das aktuell leider nicht - oder ich suche falsch 🤔
Question
Tardar
Hi zusammen,
ich habe gerade eine Froxlor Installation auf nem Debian9 minimal System eingerichtet.
Die Initialeinrichtung lief durch und ich konnte einen Kunden anlegen.
Ordner wurden alle erstellt etc. soweit so gut.
Jetzt kam ich zum Thema php-fpm und extrausers.
Ich vermute, dass ich irgendwo etwas übersehen habe, bin aber der Meinung, dass ich die Konfiguration auch komplett erledigt hab -.-
Wenn ich nun versuche, den Apache neuzustarten, gibts folgenden Fehler:
● apache2.service - The Apache HTTP Server
Loaded: loaded (/lib/systemd/system/apache2.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Mon 2019-12-30 18:16:59 CET; 10s ago
Process: 26674 ExecStart=/usr/sbin/apachectl start (code=exited, status=1/FAILURE)
Main PID: 17550 (code=exited, status=0/SUCCESS)
Dec 30 18:16:59 v220191219559105492 systemd[1]: Starting The Apache HTTP Server...
Dec 30 18:16:59 v220191219559105492 apachectl[26674]: AH00543: apache2: bad user name meinuser
Dec 30 18:16:59 v220191219559105492 apachectl[26674]: Action 'start' failed.
Dec 30 18:16:59 v220191219559105492 apachectl[26674]: The Apache error log may have more information.
Dec 30 18:16:59 v220191219559105492 systemd[1]: apache2.service: Control process exited, code=exited status=1
Dec 30 18:16:59 v220191219559105492 systemd[1]: Failed to start The Apache HTTP Server.
Dec 30 18:16:59 v220191219559105492 systemd[1]: apache2.service: Unit entered failed state.
Dec 30 18:16:59 v220191219559105492 systemd[1]: apache2.service: Failed with result 'exit-code'.
Beim Startversuch von php-fpm folgenden:
Dec 30 18:08:35 v220191219559105492 systemd[1]: Starting The PHP 7.4 FastCGI Process Manager...
Dec 30 18:08:35 v220191219559105492 php-fpm7.4[26235]: [30-Dec-2019 18:08:35] ERROR: [pool meinPool] cannot get uid for user 'meinuser'
Dec 30 18:08:35 v220191219559105492 php-fpm7.4[26235]: [30-Dec-2019 18:08:35] ERROR: FPM initialization failed
Dec 30 18:08:35 v220191219559105492 systemd[1]: php7.4-fpm.service: Main process exited, code=exited, status=78/n/a
Dec 30 18:08:35 v220191219559105492 systemd[1]: Failed to start The PHP 7.4 FastCGI Process Manager.
Dec 30 18:08:35 v220191219559105492 systemd[1]: php7.4-fpm.service: Unit entered failed state.
Dec 30 18:08:35 v220191219559105492 systemd[1]: php7.4-fpm.service: Failed with result 'exit-code'.
Den Cronjob habe ich ebenfalls laufen lassen, bringt aktuell folgendes Ergebnis:
[information] TasksCron: Searching for tasks to do
[information] TasksCron: Task10 started - setting filesystem quota
sh: 1: /usr/sbin/repquota: not found
[information] Task4 started - Rebuilding froxlor_bind.conf
[information] Cleaning dns zone files from /etc/bind/domains/
[debug] domId domain ismainbutsubto parent domain list of child domain ids
[debug] none meinHost 0 -
[information] `/etc/bind/domains/meinHost.zone` written
[debug] Generating dns config for meinHost
[information] froxlor_bind.conf written
[information] Bind daemon reloaded
[information] Task4 finished
[information] apache::createIpPort: creating ip/port settings for serverIp:80
[notice] serverIp:80 :: namevirtualhost-statement no longer needed for apache-2.4
[debug] serverIp:80 :: inserted vhostcontainer
[information] apache::createVirtualHosts: creating vhost container for domain 1, customer meinUser
chown: invalid user: ‘meinUser:meinUser’
[information] apache::writeConfigs: rebuilding /etc/apache2/sites-enabled/
[information] apache::writeConfigs: rebuilding /etc/apache2/htpasswd/
[information] apache::writeConfigs: rebuilding /etc/apache2/sites-enabled/
[information] Froxlor\Cron\Http\ApacheFcgi::reload: running service php7.4-fpm restart
Job for php7.4-fpm.service failed because the control process exited with error code.
See "systemctl status php7.4-fpm.service" and "journalctl -xe" for details.
[information] Froxlor\Cron\Http\ApacheFcgi::reload: reloading Froxlor\Cron\Http\ApacheFcgi
apache2.service is not active, cannot reload.
[notice] Checking system's last guid
Dort sieht man, dass es den User nicht gibt - aber ich hab keine Ahnung, wie ich den anlegen lasse - hätte vermutet, dass Froxlor den Usernamen aus der mySql DB ausliest und einen lokalen User anlegt.
Vielleicht kann mir ja wer helfen - Google kann das aktuell leider nicht - oder ich suche falsch 🤔
Danke Euch und viele Grüße
Tardar
Link to comment
Share on other sites
11 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now