ING Posted June 10, 2017 Share Posted June 10, 2017 Hallo, ich habe mal eine frage. Gibt es ein Image welches Froxlor mit z.b Debian direkt installiert und Konfiguriert? Bei Netcup Servern kann man ein Image z.b Debian Jessie mit Froxlor installieren und es ist direkt Konfiguriert. Vielen Dank für uere Hilfe Link to comment Share on other sites More sharing options...
d00p Posted June 10, 2017 Share Posted June 10, 2017 Nein, zumindest kein offizielles Link to comment Share on other sites More sharing options...
ING Posted June 10, 2017 Author Share Posted June 10, 2017 okay, aber wie machen die das ? Froxlor konfiguriert sich automatisch ohne Fehler und das Passwort bekommt man bequem per Email. Ich finde da nichts zu hier im Forum. Link to comment Share on other sites More sharing options...
d00p Posted June 10, 2017 Share Posted June 10, 2017 warum solltest du auch hier im Forum was dazu finden wie netcup ihr Image baut? Link to comment Share on other sites More sharing options...
ING Posted June 10, 2017 Author Share Posted June 10, 2017 es wäre doch allgemein ein vorteil wenn sich Froxlor automatisch installiert bzw Konfiguriert... Also in sachen Benutzerfreundlichkeit Link to comment Share on other sites More sharing options...
d00p Posted June 10, 2017 Share Posted June 10, 2017 Und Kaffee kochen vllt noch? Es installiert sich doch quasi von allein, musst doch nur deine Hand voll Daten eingeben... Link to comment Share on other sites More sharing options...
ING Posted June 10, 2017 Author Share Posted June 10, 2017 ... ist alles okay. war nur mal so ne frage. ;-) hätte ja sein können, man könnte sich dieses copy and paste sparen. Link to comment Share on other sites More sharing options...
aPollO Posted June 14, 2017 Share Posted June 14, 2017 Was für ein Copy&Paste? Das muss man doch gar nicht machen wenn man es über das Debian Package installiert oder liege ich da falsch? https://github.com/Froxlor/Froxlor/wiki Link to comment Share on other sites More sharing options...
d00p Posted June 14, 2017 Share Posted June 14, 2017 Na das Debian Paket konfiguriert dir nicht die Dienste...es geht um die config templates und das die noch per copy'n'paste eingerichtet werden müssen Link to comment Share on other sites More sharing options...
aPollO Posted June 14, 2017 Share Posted June 14, 2017 Achso. Ich dachte, dass das eventuell mit dem Paket mit kommt. Naja hab ich wohl zu viel "gedacht" und zu wenig gewusst. Sehe aber auch kein Problem darin die 5-10 Minuten zu investieren. Ist ja nicht kompliziert oder sowas. ING hast du vielleicht Probleme bei der normalen Installation bei denen man dir helfen kann? Link to comment Share on other sites More sharing options...
Question
ING
Hallo,
ich habe mal eine frage. Gibt es ein Image welches Froxlor mit z.b Debian direkt installiert und Konfiguriert?
Bei Netcup Servern kann man ein Image z.b Debian Jessie mit Froxlor installieren und es ist direkt Konfiguriert.
Vielen Dank für uere Hilfe
Link to comment
Share on other sites
9 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.