-
Similar Content
-
By Schutzgeist
Hallo,
vielleicht kann mir jemand hier ja einen kleinen Tipp geben.
Es ist mehr eine nginx-Konfiguration.
PHP-404-Rückmeldungen sollen "sauber" an Joomla übergeben werden.
Mein 'Froxlor-Standardvhost sieht wie folgt aus
Allerdings kann ich über das Joomla eigene REDIRECT Modul keine .php - Erweiterungen intern umleiten.
Anstatt die joomla-eigene 404 Seite zu erhalten, bekomme ich die von nginx, da die Abfrage hier als erstes ausgeführt wird.
Also habe ich meine vhost stümperhaft umgeschrieben, s.d. ein Teil seinen Soll erfüllt.
Teilweise kann ich nun die Redirects über Joomla verwalten lassen, aber oft erhalte ich LOOPs, da ich ja immer auf die index.php verweise.
So, warum nutze ich nicht die nginx-Weiterleitungen ?
Ich nutze ein Multi-Sitemodul sowie ein Modul, um eine php-Endung zu simulieren.
Beide haben mit meiner und der Standardvhost-Konfiguration leichte Schwierigkeiten.
Welche Vhost-Anpassungen nutzt ihr bei Eurer Joomla-Webseite ?
Der Fehler sitzt vermutlich 30 cm vor meinem Bildschirm.
Innerhalb meiner letzten 30 Versuche habe ich wohl oft alte Cache-Webseiten geladen und ggf. die richtige Konfig übersehen.
-
By irisdina
Warning, this is not an official guide!!!
1.
sudo mv /etc/apt/source.list /etc/apt/source.list.bak 1a. Create new Source.list
sudo nano /etc/apt/source.list 1b. insert (for Debian Stretch)
1.2B (for Ubuntu Cosmic)
1c.
sudo apt update && sudo apt dist-upgrade && sudo apt autoclean && sudo apt autoremove 1d.
sudo apt install curl wget apt-transport-https dirmngr git software-properties-common Now you can start setting up your server
2. MariaDB install
Warning use sudo command für this install!
sudo apt install mariadb-server mariadb-client 2a. MariaDB 10.3 Workround (Optional)
3. nginx install
sudo apt install nginx 3a.
mkdir /etc/nginx/sites-available mkdir /etc/nginx/sites-enabled 3b. nano /etc/nginx/nginx.conf
4. PHP install
sudo apt-get -y install php7.3-fpm php7.3-mysql php7.3-curl php7.3-gd php7.3-intl php-pear php-imagick php7.3-imap php-memcache php7.3-pspell php7.3-recode php7.3-sqlite3 php7.3-tidy php7.3-xmlrpc php7.3-xsl php7.3-mbstring php-gettext php7.3-mysql php7.3-curl php7.3-gd php7.3-intl php-pear php-imagick php7.3-imap php-memcache php7.3-memcached php7.3-pspell php7.3-recode php7.3-sqlite3 php7.3-tidy php7.3-xmlrpc php7.3-xsl php7.3-mbstring php-gettext php7.3-fpm php7.3-cli php7.3-cgi php-bcmath php-zip php7.3-fpm php7.3-curl php7.3-gd php7.3-mysql php7.3-mbstring php7.3-zip php7.3-bcmath zip unzip 4a.
sudo service nginx restart sudo service php7.3-fpm restart Froxlor install
There are two ways to get Froxlor. Stable (wget) and Beta Build (git / Master)
Stable Version
1.
cd /var/www/html/ 1a.
sudo https://files.froxlor.org/releases/froxlor-latest.tar.gz && sudo tar xzfv froxlor-latest.tar.gz or
Git Version (Beta Version)
sudo git clone https://github.com/Froxlor/Froxlor.git && sudo chown -HR www-data:www-data Froxlor/ sudo apt install composer su - www-data -s /bin/bash cd /var/www/html/Froxlor/ 1a(2). Composer install in your Froxlor directory
composer install --no-dev 1b.
sudo chown -R www-data:www-data Froxlor/ Set up Froxlor
2. Open Your Browser
2a.
http://your IP or Hostname/Froxlor
Install Froxlor finish
3d. Move userdata (Optional)
sudo mv /tmp/userdata.inc.php /var/www/html/Froxlor/lib/ 2c.
sudo rm /etc/nginx/site-enable/default don't restart nginx!
Froxlor Settings
1. Cronjob
sudo nano /etc/cron.d/froxlor insert
# # Set PATH, otherwise restart-scripts won't find start-stop-daemon # PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin # # Regular cron jobs for the froxlor package # # Please check that all following paths are correct # */5 * * * * root /usr/bin/nice -n 5 /usr/bin/php -q /var/www/html/Froxlor/scripts/froxlor_master_cronjob.php sudo chmod 0640 "/etc/cron.d/froxlor" sudo chown root:0 "/etc/cron.d/froxlor" sudo service cron restart 2. Nginx PHP Backend
Settings > Webserver settings > Nginx PHP backend
from 127.0.0.1:8888 to unix:/run/php/php7.3-fpm.sock
3.
sudo mkdir -p /var/customers/webs/ sudo mkdir -p /var/customers/logs/ sudo mkdir -p /var/customers/tmp sudo chmod 1777 /var/customers/tmp sudo service nginx restart 4. IPs and Ports > Add IP/Port
2a(1), SSL Port
Wait 5min for Autimatic Start Froxlor's cronjob or start the cronjob manually
sudo php /var/www/html/Froxlor/scripts/froxlor_master_cronjob.php --force --debug Optional
PHP-FPM activate
1. User/Group add
sudo adduser froxlorlocal --disabled-password --no-create-home && sudo usermod -a -G www-data froxlorlocal 2. libnss-extrausers install
sudo apt install nscd libnss-extrausers sudo mkdir -p /var/lib/extrausers sudo touch /var/lib/extrausers/{passwd,group,shadow} sudo mv "/etc/nsswitch.conf" "/etc/nsswitch.conf.frx.bak" sudo nano /etc/nsswitch.conf # Make sure that `passwd`, `group` and `shadow` have mysql in their lines # You should place mysql at the end, so that it is queried after the other mechanisams # passwd: compat extrausers group: compat extrausers shadow: compat extrausers hosts: files dns networks: files dns services: db files protocols: db files rpc: db files ethers: db files netmasks: files netgroup: files bootparams: files automount: files aliases: files sudo service nscd restart sudo nscd --invalidate=group 2a. Settings > System settings > Activate > Use libnss-extrausers instead of libnss-mysql
3. Settings > PHP-FPM > Activated:
Change from NO to YES
3a. PHP-FPM versions
Change > php-fpm restart command:
service php7.3-fpm restart and
Configuration directory of php-fpm: > to
/etc/php/7.3/fpm/pool.d/ 3b. Settings > Froxlor VirtualHost settings > Activate > Enable PHP-FPM for the Froxlor vHost
3c.
sudo chown -HR froxlorlocal:froxlorlocal /var/www/html/Froxlor SSL / Let's Encrypt activate
1.
sudo apt install certbot 1a.
sudo mkdir /etc/nginx/ssl && cd /etc/nginx/ssl 1b. Create SSL File
sudo openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout /etc/nginx/ssl/nginx.key -out /etc/nginx/ssl/nginx.crt 1c.
sudo nano /etc/nginx/acme.conf insert
location /.well-known/acme-challenge { alias /var/www/html/Froxlor/.well-known/acme-challenge; location ~ /.well-known/acme-challenge/(.*) { default_type text/plain; } }
2. Open your Froxlor Panel
Settings> SSL > Activated:
Change from NO to YES
2a. Settings > SSL > Settings
Change your path from your certificate / Keyfile
Path to the SSL certificate
insert
/etc/nginx/ssl/nginx.crt Path to the SSL Keyfile
insert
/etc/nginx/ssl/nginx.key 2b. Settings > SSL > Settings
Activate > Enable Let's Encrypt
Change Path to the acme.conf snippet to >
/etc/nginx/acme.conf 2c. Activate on Settings > Froxlor VirtualHost settings
- Enable Let's Encrypt for the froxlor vhost
- Enable SSL-redirect for the froxlor vhost
- HTTP Strict Transport Security (HSTS)
- Include HSTS for any subdomain
2d. Activated HTTP2 Support on > Settings > Nginx
-
By princeofnaxos
Wenn running "froxlor_master_cronjob.php -- tasks", it produces this error at the end:
sh: 1: /etc/init.d/php-fpm: not found
On Debian Stretch with PHP 7.2, this should be "/etc/init.d/php7.2-fpm". Is this a configuration setting? I can't find it.
-
By Keon
Hallo alle miteinander,
ich bin derweil dabei mir Froxlor auf einem CentOS7 System zum laufen zu bringen. Hier mal kurz ein kleiner Überblick wie ich aktuell stehe:
SSH Port ändern, sudo User, NTP, EPEL Release, FirewallD für http, https, ssh mit neuem Port frei, fail2ban für SSH Apache, MariaDB, PHPMyAdmin, mod_ssl inkl. config und self signed cert, Froxlor Grundinstallation, Webserver und SSL Einstellungen Admin Menü, (Pfade, reload Script etc.) IP/Port 443 hinzugefügt, Konfiguration -> CentOS -> sonstiges -> cronjob for froxlor Ebenso habe ich - auch wenn unter "Konfiguration" für "CentOS" nicht vorhanden, die acme.conf angelegt
Kommen wir zur Frage:
Wie bekomme ich hin, dass ich folgende Einstellung setzen kann:
Habe ich noch etwas vergessen? Etwas grundlegendes? Bin normalerweise seit Debian Etch bis Jessie gewöhnt - sammle grad die ersten Erfahrungen mit Froxlor & CentOS nach 2 Jahren Pause aus der Informatik.
Beste Grüße
-