Jump to content
Froxlor Forum
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By irisdina
      Warning, this is not an official guide!!!
      1.
      sudo mv /etc/apt/source.list /etc/apt/source.list.bak 1a. Create new Source.list
      sudo nano /etc/apt/source.list 1b.  insert (for Debian Stretch)
      1.2B (for Ubuntu Cosmic)
       
      1c. 
      sudo apt update && sudo apt dist-upgrade && sudo apt autoclean && sudo apt autoremove 1d. 
      sudo apt install curl wget apt-transport-https dirmngr git software-properties-common Now you can start setting up your server
      2. MariaDB install
      Warning use sudo command für this install!
      sudo apt install mariadb-server mariadb-client 2a. MariaDB 10.3 Workround (Optional)
      3. nginx install
      sudo apt install nginx 3a. 
      mkdir /etc/nginx/sites-available mkdir /etc/nginx/sites-enabled 3b. nano /etc/nginx/nginx.conf
      4. PHP install
      sudo apt-get -y install php7.3-fpm php7.3-mysql php7.3-curl php7.3-gd php7.3-intl php-pear php-imagick php7.3-imap php-memcache php7.3-pspell php7.3-recode php7.3-sqlite3 php7.3-tidy php7.3-xmlrpc php7.3-xsl php7.3-mbstring php-gettext php7.3-mysql php7.3-curl php7.3-gd php7.3-intl php-pear php-imagick php7.3-imap php-memcache php7.3-memcached php7.3-pspell php7.3-recode php7.3-sqlite3 php7.3-tidy php7.3-xmlrpc php7.3-xsl php7.3-mbstring php-gettext php7.3-fpm php7.3-cli php7.3-cgi php-bcmath php-zip php7.3-fpm php7.3-curl php7.3-gd php7.3-mysql php7.3-mbstring php7.3-zip php7.3-bcmath zip unzip 4a. 
      sudo service nginx restart sudo service php7.3-fpm restart Froxlor install
      There are two ways to get Froxlor. Stable (wget) and Beta Build (git / Master)
      Stable Version
      1. 
      cd /var/www/html/ 1a. 
      sudo https://files.froxlor.org/releases/froxlor-latest.tar.gz && sudo tar xzfv froxlor-latest.tar.gz or
      Git Version (Beta Version)
      sudo git clone https://github.com/Froxlor/Froxlor.git && sudo chown -HR www-data:www-data Froxlor/ sudo apt install composer  su - www-data -s /bin/bash cd /var/www/html/Froxlor/ 1a(2). Composer install in your Froxlor directory
      composer install --no-dev 1b. 
      sudo chown -R www-data:www-data Froxlor/ Set up Froxlor
      2. Open Your Browser
      2a.
      http://your IP or Hostname/Froxlor
       

      Install Froxlor finish
       3d. Move userdata (Optional) 
      sudo mv /tmp/userdata.inc.php /var/www/html/Froxlor/lib/ 2c. 
      sudo rm /etc/nginx/site-enable/default don't restart nginx!
      Froxlor Settings
      1. Cronjob
      sudo nano /etc/cron.d/froxlor insert 
      # # Set PATH, otherwise restart-scripts won't find start-stop-daemon # PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin # # Regular cron jobs for the froxlor package # # Please check that all following paths are correct # */5 * * * * root /usr/bin/nice -n 5 /usr/bin/php -q /var/www/html/Froxlor/scripts/froxlor_master_cronjob.php sudo chmod 0640 "/etc/cron.d/froxlor" sudo chown root:0 "/etc/cron.d/froxlor" sudo service cron restart 2. Nginx PHP Backend
      Settings > Webserver settings > Nginx PHP backend
      from 127.0.0.1:8888 to unix:/run/php/php7.3-fpm.sock
      3. 
      sudo mkdir -p /var/customers/webs/ sudo mkdir -p /var/customers/logs/ sudo mkdir -p /var/customers/tmp sudo chmod 1777 /var/customers/tmp sudo service nginx restart 4. IPs and Ports > Add IP/Port

      2a(1), SSL Port



      Wait 5min for Autimatic Start Froxlor's cronjob or start the cronjob manually
      sudo php /var/www/html/Froxlor/scripts/froxlor_master_cronjob.php --force --debug Optional
      PHP-FPM activate
      1. User/Group add
      sudo adduser froxlorlocal --disabled-password --no-create-home && sudo usermod -a -G www-data froxlorlocal 2. libnss-extrausers install 
      sudo apt install nscd libnss-extrausers sudo mkdir -p /var/lib/extrausers sudo touch /var/lib/extrausers/{passwd,group,shadow} sudo mv "/etc/nsswitch.conf" "/etc/nsswitch.conf.frx.bak" sudo nano /etc/nsswitch.conf # Make sure that `passwd`, `group` and `shadow` have mysql in their lines # You should place mysql at the end, so that it is queried after the other mechanisams # passwd: compat extrausers group: compat extrausers shadow: compat extrausers hosts: files dns networks: files dns services: db files protocols: db files rpc: db files ethers: db files netmasks: files netgroup: files bootparams: files automount: files aliases: files sudo service nscd restart sudo nscd --invalidate=group 2a. Settings > System settings > Activate > Use libnss-extrausers instead of libnss-mysql

      3. Settings > PHP-FPM > Activated:
      Change from NO to YES
      3a. PHP-FPM versions
      Change > php-fpm restart command:
      service php7.3-fpm restart and
      Configuration directory of php-fpm: > to 
      /etc/php/7.3/fpm/pool.d/ 3b. Settings > Froxlor VirtualHost settings > Activate > Enable PHP-FPM for the Froxlor vHost

      3c. 
      sudo chown -HR froxlorlocal:froxlorlocal /var/www/html/Froxlor SSL / Let's Encrypt activate
      1.
      sudo apt install certbot 1a. 
      sudo mkdir /etc/nginx/ssl && cd /etc/nginx/ssl 1b. Create SSL File
      sudo openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout /etc/nginx/ssl/nginx.key -out /etc/nginx/ssl/nginx.crt 1c. 
      sudo nano /etc/nginx/acme.conf insert
      location /.well-known/acme-challenge { alias /var/www/html/Froxlor/.well-known/acme-challenge; location ~ /.well-known/acme-challenge/(.*) { default_type text/plain; } }  
      2. Open your  Froxlor Panel
      Settings> SSL > Activated:
      Change from NO to YES
      2a. Settings > SSL > Settings
      Change your path from your certificate / Keyfile
      Path to the SSL certificate
      insert
      /etc/nginx/ssl/nginx.crt Path to the SSL Keyfile
      insert
      /etc/nginx/ssl/nginx.key 2b. Settings > SSL > Settings
      Activate > Enable Let's Encrypt

      Change Path to the acme.conf snippet to > 
      /etc/nginx/acme.conf 2c. Activate on Settings > Froxlor VirtualHost settings
      - Enable Let's Encrypt for the froxlor vhost
      - Enable SSL-redirect for the froxlor vhost
      - HTTP Strict Transport Security (HSTS)
      - Include HSTS for any subdomain






      2d. Activated HTTP2 Support on > Settings > Nginx
       
    • By nisamudeen97
      Hi,
       
      I need to enable access log for froxlor.   In froxlor vhost config I cannot see access log enabled.  If I edit manually it is getting overwritten.  Below is my vhost config for froxlor.  let me know how to enable access log and error log for foxlor.
       
      <VirtualHost 192.168.73.40:443>
      DocumentRoot "/var/www/froxlor/"
      ServerName hostname.cm
      SSLEngine On
      SSLProtocol -ALL +TLSv1 +TLSv1.2
      SSLCompression Off
      SSLHonorCipherOrder On
      SSLCipherSuite ECDH+AESGCM:ECDH+AES256:!aNULL:!MD5:!DSS:!DH:!AES128
      SSLVerifyDepth 10
      SSLCertificateFile /etc/apache2/ssl/*********.crt
      SSLCertificateKeyFile /etc/apache2/ssl/******.key
      SSLCACertificateFile /etc/apache2/ssl/*******CA.crt
      SSLCertificateChainFile /etc/apache2/ssl/******.crt
      </VirtualHost>
       
    • By Kieron Boswell
      Hi guys, have just got froxlor set-up and looking around it getting it ready to move all my clients into, one or two things I haven't been able to see yet.
      Mail settings, I'm used to being spoon-fed mail settings when I create an account, generally are these fixed so I can make a note? And is there a way to use mail.domain.tld rather than using the primary server domain for example? I'd really like something like that to be the default when I create a new website/email etc if possible. Ftp, is it possible to set ftp.domain.tld as a record that works for FTP automatically when an account is made under a customer? Many thanks, enjoying froxlor so far :-)
    • By Andrew Stafford
      Good day, 
      First time posting here, I just got Froxlor setup on a hyperV, Debian 9 VM.
      It is up and running, got my customers/ domains added. I can't seem to get the domain to cooperate though. 
      I use Godaddy to buy and host my domains. What do I need to do on Godaddy and through Froxlor to get my website visible to the public?
      I currently tried setting an a record on godaddy with my servers ip.
      I changed the name servers in froxlor to those listed by godaddy for my domain.
      Am i on the right track or missing it entirely?
      Any help would be appreciated!
      Thanks, - Andrew 
    • By Christian Vogel
      Ich habe Froxlor installiert und alle Konfigurationen ausgeführt. Dennoch kann ich nicht über Outlook oder Mail auf mein Imap Konto zugreifen. 
      Im syslog sehe ich
      Sep 10 10:11:51 vserver3130 dovecot: imap-login: Aborted login (no auth attempts in 0 secs): user=<>, rip=87.191.51.26, lip=109.73.50.135, session=<uGoEloF1eIxXvzMa>
      postconf -d und dovecot -n hab ich als Textdatei angehängt.
      Habe auch schon etwas bei Google gesucht und hier im Forum die Suchfunktion bemüht - finde aber keine Lösung. Kann mir hier jemand helfen? Werden noch andere Infos benötigt für eine Lösung?
      Danke
      Christian
       
       
      dovecot.txt
      postconf.txt




×
×
  • Create New...