Jump to content
Froxlor Forum
  • 0

[solved] FTP Verbindung klappt nicht


Nighteyes

Question

Hallo zusammen,

 

leider bekomme ich trotz des einf?gen der Konfiguration von Froxlor keine Verbindung zum FTP Server,.

Herstellen kann er aber meckert das angeblich das Passwort falsch sei.

 

Hier meine Konfiguration vielleicht ?bersehe ich ja etwas ...

#
# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
# To really apply changes, reload proftpd after modifications, if
# it runs in daemon mode. It is not required in inetd/xinetd mode.
# 

# Includes DSO modules
Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6 on
# If set on you can experience a longer connection delay in many cases.
IdentLookups off

ServerName "cloudlyweb.de FTP Server"
ServerType standalone
DeferWelcome off

MultilineRFC2228 on
DefaultServer on
ShowSymlinks on

TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200

DisplayLogin                    welcome.msg
DisplayChdir               .message true
ListOptions                 "-l"

DenyFilter \*.*/

# Use this to jail all users in their homes 
# DefaultRoot ~

# Users require a valid shell listed in /etc/shells to login.
# Use this directive to release that constrain.
# RequireValidShell off

# Port 21 is the standard FTP port.
Port 21

# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
# PassivePorts                  49152 65534

# If your host was NATted, this option is useful in order to
# allow passive tranfers to work. You have to use your public
# address and opening the passive ports used on your firewall as well.
# MasqueradeAddress 1.2.3.4

# This is useful for masquerading address with dynamic IPs:
# refresh any configured MasqueradeAddress directives every 8 hours
<IfModule mod_dynmasq.c>
# DynMasqRefresh 28800
</IfModule>

# To prevent DoS attacks, set the maximum number of child processes
# to 30.  If you need to allow more than 30 concurrent connections
# at once, simply increase this value.  Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30

# Set the user and group that the server normally runs at.
User proftpd
Group nogroup

# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022  022
# Normally, we want files to be overwriteable.
AllowOverwrite on

# Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:
# PersistentPasswd off

# This is required to use both PAM-based authentication and local passwords
# AuthOrder mod_auth_pam.c* mod_auth_unix.c

# Be warned: use of this directive impacts CPU average load!
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
#
# UseSendFile off

TransferLog /var/log/proftpd/xferlog
SystemLog   /var/log/proftpd/proftpd.log

# Logging onto /var/log/lastlog is enabled but set to off by default
#UseLastlog on

# In order to keep log file dates consistent after chroot, use timezone info
# from /etc/localtime.  If this is not set, and proftpd is configured to
# chroot (e.g. DefaultRoot or <Anonymous>), it will use the non-daylight
# savings timezone regardless of whether DST is in effect.
#SetEnv TZ :/etc/localtime

<IfModule mod_quotatab.c>
QuotaEngine on
</IfModule>

<IfModule mod_ratio.c>
Ratios off
</IfModule>


# Delay engine reduces impact of the so-called Timing Attack described in
# http://www.securityfocus.com/bid/11430/discuss
# It is on by default. 
<IfModule mod_delay.c>
DelayEngine on
</IfModule>

<IfModule mod_ctrls.c>
ControlsEngine        off
ControlsMaxClients    2
ControlsLog           /var/log/proftpd/controls.log
ControlsInterval      5
ControlsSocket        /var/run/proftpd/proftpd.sock
</IfModule>

<IfModule mod_ctrls_admin.c>
AdminControlsEngine off
</IfModule>

#
# Alternative authentication frameworks
#
#Include /etc/proftpd/ldap.conf
Include /etc/proftpd/sql.conf

#
# This is used for FTPS connections
#
#Include /etc/proftpd/tls.conf

#
# Useful to keep VirtualHost/VirtualRoot directives separated
#
#Include /etc/proftpd/virtuals.conf

# A basic anonymous configuration, no upload directories.

# <Anonymous ~ftp>
#   User ftp
#   Group nogroup
#   # We want clients to be able to login with "anonymous" as well as "ftp"
#   UserAlias anonymous ftp
#   # Cosmetic changes, all files belongs to ftp user
#   DirFakeUser on ftp
#   DirFakeGroup on ftp
# 
#   RequireValidShell off
# 
#   # Limit the maximum number of anonymous logins
#   MaxClients 10
# 
#   # We want 'welcome.msg' displayed at login, and '.message' displayed
#   # in each newly chdired directory.
#   DisplayLogin welcome.msg
#   DisplayChdir .message
# 
#   # Limit WRITE everywhere in the anonymous chroot
#   <Directory *>
#     <Limit WRITE>
#       DenyAll
#     </Limit>
#   </Directory>
# 
#   # Uncomment this if you're brave.
#   # <Directory incoming>
#   #   # Umask 022 is a good standard umask to prevent new files and dirs
#   #   # (second parm) from being group and world writable.
#   #   Umask 022  022
#   #            <Limit READ WRITE>
#   #            DenyAll
#   #            </Limit>
#   #            <Limit STOR>
#   #            AllowAll
#   #            </Limit>
#   # </Directory>
# 
# </Anonymous>

# Include other custom configuration files
Include /etc/proftpd/conf.d/

 

Viele Gr??e

Nighteyes

Link to comment
Share on other sites

13 answers to this question

Recommended Posts

...vermutlich weil du vorher nicht alle Einstellungen vorgenommen hast und/oder die Services nicht konfiguriert hast...folge doch bitte der Anleitung im Wiki.

 

Und nat?rlich sollte der Cronjob normal automatisch und regelm??ig ausgef?hrt werden - WENN DU denn den Cron auch entsprechen eingerichtet hast, was du h?ttest tun sollen.

Link to comment
Share on other sites

Habe nun neu installiert.

Also Server neu und froxlor neu.

Dann die Konfiguration f?r FTP befolgt.

klappt noch nicht.

 

Kunde richtig angelegt.

Passwort copy paste eingef?gt und manuell eingef?gt.

Stimmt alles.

 

Schreibe gleich die Logs

Link to comment
Share on other sites

Folgendes steht da drinne:

Jun 28 22:36:56 vmd4149.contabo.net proftpd[12552] vmd4149.contabo.net (p4FE004BF.dip0.t-ipconnect.de[79.224.4.191]): FTP session opened.
Jun 28 22:36:56 vmd4149.contabo.net proftpd[12552] vmd4149.contabo.net (p4FE004BF.dip0.t-ipconnect.de[79.224.4.191]): notice: unable to use '~/' [resolved to '/var/customers/webs/tester/']: No such file or directory
Jun 28 22:36:56 vmd4149.contabo.net proftpd[12552] vmd4149.contabo.net (p4FE004BF.dip0.t-ipconnect.de[79.224.4.191]): Preparing to chroot to directory '~/'
Jun 28 22:36:56 vmd4149.contabo.net proftpd[12552] vmd4149.contabo.net (p4FE004BF.dip0.t-ipconnect.de[79.224.4.191]): chroot to '~/' failed for user 'tester': Operation not permitted
Jun 28 22:36:56 vmd4149.contabo.net proftpd[12552] vmd4149.contabo.net (p4FE004BF.dip0.t-ipconnect.de[79.224.4.191]): error: unable to set default root directory
Jun 28 22:36:56 vmd4149.contabo.net proftpd[12552] vmd4149.contabo.net (p4FE004BF.dip0.t-ipconnect.de[79.224.4.191]): FTP session closed.
~                                                                                                                                         
Link to comment
Share on other sites

Der Kunde is angelegt hast du gesagt? Lief denn auch der Cronjob? Existiert das Verzeichnis, denn die Log sagt, dass das nicht der Fall ist ('/var/customers/webs/tester/']: No such file or directory)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...