Jump to content
Froxlor Forum

Leaderboard

Popular Content

Showing content with the highest reputation since 12/01/21 in Posts

  1. This worked for me! See now the switch on in froxlor php config!
    1 point
  2. Also wenn deine Domains alle mehr oder weniger gleich sind, ist sowieso die Frage warum die in Froxlor administriert werden müssen. Just my 2 cents. Aber zurück zum Thema: Mir scheint es dass Du einfach keine Lust hast dir ein paar Scripte zu schreiben, die die API füttern sondern diese Aufgabe einfach (und am besten kostengünstig) an andere delegieren möchtest. Auch die Ausrede es sei ein Produktivsystem kann so nicht gelten. In so einem Fall schafft man sich halt ein Entwicklungssystem an.
    1 point
  3. Will do, thanks! And thanks for the awesome work the froxlor team does, been using and recommending this software for... wow... is it 12 years now?
    1 point
  4. Dear froxlor community, we are pleased to announce the release of froxlor 2.1! Notable new features, improvements and also breaking changes are listed below: Duplicate domains: You can now easily duplicate domains as admin user. With just one click, specify the new domain-name and select the target-customer and all the compatible settings from the source domain will be used for the new domain. Via the new API call Domains.duplicate(), you can even overwrite any domain-value you like by passing them to the request, just like you would for Domains.add(). Deactivate single domains: It is now possible to deactivate and re-activate single domains. This also deactivates any email-address/account created with that domain. Deactivate single ftp-accounts: As well as domains, users can now enable or disable a specific ftp-account. One-Time Login links: Admin users are now able to generate a one-time login-link for customers via CLI or API, which start a customer session automatically without the customer entering any login credentials. This comes in handy especially when using third-party interfaces / portals to integrate a link to the customers froxlor dashboard. You can also specify the validity time for the link (from 10 up to 120 seconds) and a comma-separated list of IP addresses to restrict the request-source. The corresponding added API call is Froxlor.generateLoginLink(). CustomerBackup is now DataDump: The CustomerBackup API calls and its integration in the UI has been renamed to DataDump to clarify the difference between a one-time data-extraction/dump and backups. This also paves the path for a possible Backup-feature in the future. Additionally, if the php-gnupg extension is present, you have the ability to encrypt your data-exports with your pgp-key. OTP for critical settings: We've added an OTP requirement for some of the critical/system-related settings in order to enhance security. To change these specific settings, 2FA/OTP has to be enabled system-wide and activated for the current admin user. More details see https://docs.froxlor.org/v2.1/admin-guide/settings/#_1-3-settings-that-require-otp-validation Custom page for unmanaged/unknown domains: In case a domain is pointing to your server but is not yet added to froxlor a customizable notice is now displayed instead of the froxlor login page. You can specify your own content for the file as admin in "Email- & File-templates". New update channel 'nightly': We now create nightly-builds for every successful push to the git-repository. If you want to participate in testing the current development state, you are now able to do so without the need to have composer/npm and all the dev-tools requirements but just use a pre-built nightly. These packages are only available through the updater of froxlor (either CLI or Web-Update, if enabled). To activate, just select the update-channel 'nightly' (only available in settings-mode 'advanced'). Keep in mind that downgrades are not supported. You can always switch back to the stable or beta channel but you will have to wait until corresponding releases catch up to the nightly-version you have. Changes in 2.1: New features: [API] new Domains.duplicate() command to copy domains [API] One-Click One-Time-Login-Link (remote-login) via newFroxlor.generateLoginLink() [API] Domains.add()/update() -> added parameter `deactivated` [API] Ftps.add()/update() -> added parameter `login_enabled` [UI] OTP requirement for specific/system-relevant settings [UI] markdown syntax in custom_notes field [UI] change password/theme/language is now combined in profile [Settings] New update-channel "nightly" (development-versions only, every signed commit to 'main' will be build) [CLI] new froxlor:config-diff command [other] In order to encrypt data-exports using pgp you need to have the php-gnupg extension installed and activated. [other] Domains pointing to the server but are unmanaged by froxlor will now display a corresponding message. Breaking changes: [API] CustomerBackups renamed to DataDump [Services] support for lighttpd webserver will be dropped in future 2.1 releases due to no active maintainer and no significant user-base [Distros] Debian 10 buster & Ubuntu 18.04 bionic were deprecated as of 2.0.x and are now removed in froxlor-2.1 [Distros] Gentoo is deprecated due to no active maintainer [Config] postfix needs reconfiguration in the file `/etc/postfix/mysql-virtual_mailbox_domains.cf` in order for deactivated domain flag to be recognized Alternatively, simply search for the line: query = SELECT domain FROM panel_domains WHERE domain = '%s' AND isemaildomain = '1' and replace it with: query = SELECT domain FROM panel_domains WHERE domain = '%s' AND isemaildomain = '1' AND deactivated = 0 Changes in 2.1.1: [DNS] fix wrong result in Domain::getMainSubdomainIds(); #1202 [Install] fix wrong version being set Changes in 2.1.2: [general] fixed compatibility with older installations [DNS] fixed wrong type when dns zone for system-hostname is active [UI] fixed non-empty value for file-input fields when using uploaded logos [UI] fixed 2fa login when using email validation [UI] fixed wrong size-unit for mailquota-dashboard-info [UI] fixed possibility to have empty name/surname and empty company [Installation] allow more complex passwords to be set (skip escaping) Changes in 2.1.3: [CLI] Add manual_config parameter to install json; #1208 [API] use panel.password_min_length setting for Froxlor.generatePassword() default length parameter [general] allow '::1' as valid mysql localhost value [UI] fixed bug that lead to select-box values not being changed [UI] fixed bug that lead to an error when using custom.css Changes in 2.1.4: [UI] Don't show stats-icon for domains with redirect [Cron] hide goaccess output in traffic cron and keepalive database connection for long-running log-analysis [Cron/Apache] use same certificate-file if child-domain inherits the parentdomain's certificate data (avoid possible http 421 Misdirected Request) [UI] use different language string for password-placeholder when adding a new customer; fixes #1216 [Install] don't use deprecated 'mysql_native_password' for mysql8; fixes #1214 [Install] possibility to specify sender address for froxlor as the admin-email address, custom or empty for system-default; fixes #1217 [general] don't output ipv6 in brackets for system.ipaddress setting as the brackets will be added to the value resulting in an invalid mysql-access-host; fixes #1215 [settings] use correct validation for dnscheck-resolver; fixes #1220 Changes in 2.1.5: [Config] disable pam auth in dovecot for debian bookworm [general] Check for argon2 support before using constant PASSWORD_ARGON2X; #1228 [UI] fix incorrect top-5 customers in traffic overview for admins [UI] show manual update command if webupdate is disabled [Cron] create empty dns-server config if no (dns-enabled) domain is determined; fixes #1230 [general] set correct channel for update-check if switching from apt-installed stable/testing to nightly [API] fix check for allowed_phpconfigs if using mod_php when adding/editing a customer Changes in 2.1.6: [general] fix regression bug from "Check for argon2 support before using constant PASSWORD_ARGON2X; #1228" Changes in 2.1.7: [UI] backport UI/Callback fixes from 2.2-dev (main); fixes #1235 [UI] fix regression bug in 'incorrect top-5 customers' sorting in traffic-overview which leads to incorrect customer-links due to wrong indexing in the array; fixes #1236 [UI] fix adding/editing domains as customer when php is not enabled for the domain [Cron] don't add custom-vhost-content to deactivated domain-vhosts [Cron] correctly save pass_authorizationheader flag for php-configs if FCGID is used; correctly add 'FcgidPassHeader' for froxlor-vhost itself if set [Cron] wrap SetHandler to php-fpm in file-exists check, as we do for customer-domains already [API] correctly disabled ssl-related settings when domain update sets ssl-enabled flag to false; fixes #1241 [general] correctly validate if a symlink is within the customers home-directory if it's not an absolute path; fixes #1242 See also our Migration Guide for more information. We hope you enjoy froxlor 2.1 and look forward to your feedback. Download: froxlor-2.1 Documentation at https://docs.froxlor.org/. Visit https://www.froxlor.org and join our Discord channel (https://discord.froxlor.org) for support, help, participation or just to chat Thank you, the froxlor team
    1 point
  5. Ich habe ehrlich keine Ahnung, ich habe deinen Key hinzugefügt und kurze Zeit später ging plötzlich alles. Ich habe nichts weiter mehr gemacht, das System hatte wohl Angst vor dir.
    1 point
  6. You are right. I had nscd installed a long time ago, as it was necessary for froxlor. It is removed now. Thanks a lot for your support!
    1 point
  7. Gude, ich habe vor zirka einem Monat einen neuen Server aufgesetzt, Installation erfolgte mit Debian 12 und ansonsten nach der Froxlor-Doku. Vorgestern ist mir aufgefallen, dass ich fail2ban vergessen habe mit zu konfigurieren. Lief zwar, aber es waren keine Dienste aktiviert. Ich tickerte meine Dienste in die fail2ban Konfiguration und merkte heute, dass meine IP gesperrt wurde, da es zu viele fehlerhafte Logins gab. Ich forschte etwas und stieß darauf, dass Dovecot mit der Anmeldung über pam scheiterte, anschließend die SQL authentifizierung gegen die Froxlor-Datenbank aber erfolgreich klappte. Ursache dafür ist die Konfiguration conf.d/auth-system.conf.ext. Sie wird in Dovecot in der conf.d/10-auth.conf inkludiert. In Zeile 10-15 ist die passdb mit driver = pam aktiv. Damit versucht Dovecot also die Authentifizierung gegen pam. Die aber scheitert, weil es für die Mail-User keine Systemuser gibt. Durch den ersten Login-Versuch gegen pam gibt es natürlich einen Logeintrag und wenn man fail2ban ziemlich knapp konfiguriert hat, dann gibts einen ban auf die IP vom Request. Ohne fail2ban fällt das gar nicht auf, weil dovecot dann einfach weitermacht und den Login gegen die Froxlor-DB ausprobiert (und dann auch Erfolg hat). Da ich (und vermutlich die meisten mit dem normalen Froxlor-Setup) keine pam Authentifizierung (oder noch andere, wobei nur pam per Dovecot-default aktiv ist) für Dovecot brauchen, habe ich den Include in der 10-auth.conf mit # auskommentiert. Damit wird nur noch der SQL Login versucht, es gibt keinen "unknown user"-Log und fail2ban hält die Finger still. Ich habe mir auch nochmal die Installationsdoku und die Konfiguration angesehen und habe dazu nirgends einen Hinweis gefunden, dass pam deaktiviert werden sollte / könnte. Falls ich es doch mehrmalig überlesen habe, entschuldige ich mich :). Oder gibt es einen anderen Grund, dass pam unbedingt aktiv sein sollte? Ich konnte für mein ziemliches Standard-Setup keinen Grund finden. Vielleicht hilft es ja jemand, der sich damit auch herumärgert =). Grüße Montgomery
    1 point
  8. Dankeschön! Ich Spende dir für nen Kaffe!
    1 point
  9. 1 point
  10. Jup das hat funktioniert. Die Daten welche aktuell im Log stehen wurden verarbeitet. Auch die Trafficberechnung im Panel bestätigt das. Vielen Dank für deine Hilfe.
    1 point
  11. sorry, that was the solution. Since I did some experiments with the apache conf with a new alias, the hostname was diffrent. I rolled it all back, and now it works! Thank you very much for your fast reply and sorry for the fact that I posted the question without thinking twice
    1 point
  12. Yes you're right, it was me that I had that redirection in place. I removed and I've been able to login just fine. Thank you
    1 point
  13. Thanks a lot for the extremely quick replies! I'll now have an idea, what to update.
    1 point
  14. Unglaublich... hat binnen 10 min funktioniert, Froxlor zeigt brav mariaDB 10.6.16! Yes! 😀
    1 point
  15. Danke fürs genau Hingucken. Das war unnötiger Lärm, den ich dadurch gemacht habe, sorry.
    1 point
  16. Neee neee, da ist kein SORRY notwendig 😄 froxlor ist schon MEEEGASEXY! Und wie ich gerade herausgefunden habe, quotatool/repquota gehen auch, dazu muß aber erst mal quota in GRUB eingetragen werden... 🙈 Ich war total blind, weil ich in der /etc/fstab gesehen hab, das steht schon drin... Also, für alle, die in Zukunft danach suchen: froxlor und quota auf xfs geht, man muß unter Debian nur in der /etc/default/grub die GRUB_CMDLINE_LINUX um die folgenden Parameter erweitern: "rootflags=usrquota,grpquota" (ggf. wenn schon andere Werte drin stehen, diese mit einem Leerzeichen vor rootflags einfügen) Dann ein update-grub, et voila. So, dann setzen wir bei einem User auch mal quota, und gucken ob das auch umgesetzt wird 🙂
    1 point
  17. re-set the passwords in Froxlor worked for me, those are only some 20 users with old passwords (generated with syscp some years ago) thanks for all the help 🎉
    1 point
  18. vielen Dank! es hat funktioniert und ich kann mich jetzt wieder einloggen.
    1 point
  19. Yep, beim Updaten einer WordPress-Installation hab ich mit dem Site-Check zufällig rausgefunden das php8.2-curl und php8.2-mbstring nicht installiert waren... jetzt ist die Anzeige in Froxlor wieder da... 😀 Danke für die wie immer Lightspeed-Reaktion. Frage: schläfst Du eigentlich irgendwann mal? Lach... Das Froxlor 2-Panel sieht übrigens sehr hübsch aus.
    1 point
  20. So ich habe jetzt noch den Server neu gestartet, waren eh Kernel Updates offen (sonst aber nichts). Nach dem Reboot, gingen alle zuvor angelegten Testkunden. Habe dann noch einen Kunden erstellt, hat auf Anhieb geklappt. Das soll mir mal wer erklären, ist ja kein Windows... Danke für deine Zeit!
    1 point
  21. Hat perfekt geklappt. danke
    1 point
  22. Guten Morgen, seit dem Upgrade auf Ubuntu 22.04 habe ich das Problem, dass der awstats nur noch teilweise die Daten ausliest. Ganz so, als wenn er eine relativ neue Log-Datei vor sich hätte. Der Froxlor-Cron für traffic und usage_report laufen um 00:00 bzw 00:05 Uhr. Laut /etc/crontab sollte cron.daily um 3:25 abgearbeitet werden, logrotate selbst startet allerdings auch um 00:00 Uhr. /edit: Ok, der Daily passt tatsächlich, ich habe aber bei genauerem hinschauen bemerkt, dass der logrotate von einem systemd-timer wegrotiert wird. Ich bleib beim Cron, so funktionierts jetzt wieder wie gewohnt
    1 point
  23. sorry! I found it out by myself and I can't remove this post. - The templates are bound to the admin account that creates the email addresses. If a customer is managed by admin-A and admin-B creates an email address, the standard template is used, if admin-A has no custom templates created
    1 point
  24. Ich habe, nachdem meine anfänglichen Fehlerkorrekturen nicht ausreichten und auch die vorgeschlagenen Anpassungen auf Github nicht erfolgreich waren, Debian 12.0 Bookworm noch mal komplett neu aufgesetzt. Diesmal das von netcup bereitgestellte Minimal Setup. Die vorgeschlagenen Änderungen in der /etc/proftpd/tls.conf -TLSOptions NoCertRequest NoSessionReuseRequired +TLSOptions NoSessionReuseRequired machten ProFTPd, wie schon im Eingangspost erwähnt, zumindest für den manuellen Start lauffähig. Die vorgeschlagenen Änderungen in der /etc/proftpd/proftpd.conf - MultilineRFC2228 on machen es nun auch möglich, dass ProFTPd beim automatischen Start nach dem Booten nicht mehr abbricht. Klasse, damit ist mein Problem behoben. Hätte ich vielleicht auch selber drauf kommen können, aber in den Logs stand nur, MultilineRFC2228 sei deprecated, das habe ich nicht als schwerwiegend erachtet. Auch hat m.E. erst die Neuinstallation die Änderungen wirksam gemacht. Vielen Dank für die wirklich schnelle und erstklassige Hilfe. Problem gelöst!
    1 point
  25. Ja, fast richtig! Die PDO.so ist zwar in /usr/share/php8.1 vorhanden, aber fehlte in /etc/php/php8.1/php-fmp/mods-avaible und musste dann noch in den ./conf als Verknüpfung abgelegt werden. Hurra, Installation ist gelaufen und funktioniert! Vielen Dank für das klasse Forum und die schnelle Hilfe.
    1 point
  26. Vorab, ich bin kein Entwickler, daher kann das Folgende Fehler enthalten und/oder besser gelöst werden. Ferner kann ich es auch nicht mit einem "pull request" vollständig in die froxlor-Entwicklung einarbeiten - vielleicht erbarmt sich ja der Entwickler oder ein "Nutznießer" der folgenden Informationen. Ich habe das Setup unter debian 11 / bullseye laufen - für andere Distributionen mögen Anpassungen nötig sein. UI / SQL Zuerst gibt es zusätzliche Optionen für die E-Mail-Adressen (siehe frx-settings.jpg), dazu müssen customer_email.php, lib/formfields/customer/email/formfield.emails_edit.php und lib/Froxlor/Api/Commands/Emails.php angepasst werden (siehe *.diff). Damit die Settings auch irgendwo gespeichert werden, erweitert man die Datenbank von froxlor (siehe mail_virtual.sql, es braucht nur die 5 ALTER TABLE Befehle angewendet auf die Datenbank von froxlor). [die diffs sind gegen froxlor 2.0.6 erstellt!] DKIM / RSPAMD Nachdem der Nutzer nun Dinge einstellen kann (die sich noch nicht auswirken) kümmern wir uns mal um DKIM mit rspamd. Dazu könnten die Einstellungen wie in frx-dkim-settings.jpg vorgenommen werden. Ich bin mir nicht mehr sicher, ob der Ordner dkim unter /etc/postfix im Beispiel erst angelegt werden musste, oder ob sich froxlor darum kümmert. Dort werden nun jedenfalls eine dkim-keys.conf und die keys abgelegt. Da wir das aber in einem rspamd-tauglichen Format benötigen, wird zusätzlich das Skript /usr/local/sbin/dkim2rspamd getriggert. Dazu muss natürlich rspamd installiert und konfiguriert sein. Das Skript baut nun eine Konfiguration zur Mailsignierung aus den Daten, die froxlor ins Dateisystem gelegt hat. Benötigt werden bash, awk, head, cat und es wird von einem System mit systemd ausgegangen. SPAMSETTING / RSPAMD Nun müssen noch die Spamsettings der Nutzer ja irgendwie ins rspamd. Da ich hier im froxlor keinen Trigger gefunden habe, erledigt das ein cron-job. Z.B. alle 5 Minuten: */5 * * * * root /usr/local/sbin/froxlor2rspamd Im Skript froxlor2rspamd (welches auch unter /usr/local/sbin liegt) müssen noch Datenbankanmeldedaten mit mindestens lesenden Rechten hinterlegt werden. Hier kommen der mysql/mariadb-client, sed, cat und diff zum Einsatz - diff gehört wohl nicht unbedingt zu einer Grundausstattung. Es wird eine settings_frx.conf für rspamd erstellt, die aber erst noch eingebunden werden muss. Dazu kann ans Ende der (ggf. zu erstellenden) /etc/rspamd/local.d/settings.conf folgende Zeile .include(try=true; priority=1; duplicate=merge) "$LOCAL_CONFDIR/local.d/settings_frx.conf" TODO Bleibt die Frage, wie wirkt sich der Virenschutzparameter aus. Die Antwort ist : "kommt drauf an". Aktuell habe ich einen AV mit icap im rspamd und der schert sich gerade gar nicht um die Einstellung - Vorschläge gern willkommen. Vorher lief amavis-milter und mit dem habe ich direkt die SQL-Tabelle ausgelesen. Wie das eingestellt war, finde ich auf Anfrage vielleicht noch in einem Backup. Diese "Information" ist aus dem Gedächtnis erstellt und wurde nicht an einen System from scratch ausprobiert. Du solltest im Linux wissen was Du tust, dann kommst Du sicher zurecht, wenn nicht ergänze ich gern oder beantworte Fragen. Ich werde aber keine Anleitungen geben wir z.B. rspamd oder postfix grundsätzlich zu konfigurieren sind. Das hier dient nur als Ergänzung für ein schon laufendes System mit diesen Komponenten. Viel Erfolg. Und wenn ich mir was wünschen dürfte - bringt das bitte so oder ähnlich ins froxlor. formfield.emails_edit.php.diff customer_email.php.diff Emails.php.diff mail_virtual.sql froxlor2rspamd dkim2rspamd
    1 point
  27. I found installing froxlor very easy but I did come across this issue because I am a windows guy and cant read instructions😀 I proposed a small change to the documentation here: Create privileged database user - Make clearer about changing the password - https://github.com/Froxlor/Documentation/issues/9
    1 point
  28. Thanks a lot @d00p, I use mariadb with ubuntu 18.04 relaese and when i read the topic which you share, i decided to update mariadb 10.11 version. Everything works really well. thanks again
    1 point
  29. sorry, wrote it fast without checking everything. will resume it tomorrow better.. after some more research...
    1 point
  30. Dear froxlor community, we are excited to announce the release of froxlor 2.0! This release includes several improvements and new features, which we have summarized below for you: Redesigned UI: The appearance of the user interface has been completely modernized. The redesigned froxlor is now even more user-friendly, efficient and customizable. We've added a global search for general data as well as for searching functions and configuration options. Custom column selection for listings has been added. And of course, it's all 100% responsive. Revamped installation routine: The froxlor installation has been improved in many ways it is now easier, faster than ever and looks better. Now you can activate SSL and PHP-FPM from within the installation process and start using froxlor in minutes. Improved security features: With expanded and enhanced security features like modern password hashing-algorithms we have made froxlor a better place for your data. On top of that, the code has been completely reviewed and restructured to make security fixes easier, CSFR-tokens on forms have been implemented to make Cross Site transactions more secure, and much more. CLI tool: With the new froxlor CLI tool, you can now use froxlor via the command line – great for automation! For example, complete the installation process, check and run updates, (re)configure services and more. Changes in 2.0: New features: [API] new MysqlServer Command to allow multiple MySQL servers to be used by customers [API] optional requests via api.php?/module/function/ [UI] Global-search [UI] Customize visibility of table-columns [CLI] new bin/froxlor-cli tool (installer, updater, helper scripts and cron) [Distros] added Debian Bookworm (12)* and Ubuntu 22.04 (Jammy Jellyfish) Breaking changes: PHP-7.4+ and php-gmp extension are now required [API] auth via HTTP-Auth, old format with apikey/secret in the request is no longer possible [UI] auto-update must be enabled explicitly in lib/config.inc.php [Config] proftpd needs to be re-configured (or simply add `OpenSSL` to `SQLAuthTypes` in `/etc/proftpd/sql.conf`) [Config] dovecot needs to be re-configured (or simply comment out `default_pass_scheme ...` in `/etc/dovecot/dovecot-sql.conf.ext`) [Distros] removed Debian Stretch / Ubuntu Xenial and CentOS [APT package] default installation path is now /var/www/html/froxlor. If you are updating, your froxlor installation will be moved there from /var/www/froxlor! Changes in minor releases: 2.0.10 security release enforce password requirements set in settings for directory-protection [CWE-521: Weak Password Requirements] add missing use statement for error-reporting to include the dbms version [CWE-391: Unchecked Error Condition] validate existence of language in admin-templates [CWE-840: Business Logic Errors] verify cronjob interval is one of the fixed available values [CWE-96: Static Code Injection] fix possible privilege escalation from customer to root when specifying custom error documents in directory-options [CWE-94: Code Injection] 2.0.11 security / bugfix release add new email-domain-overview for better overview of multiple email-domains/addresses fix let's encrypt dns validation check backup possible remote-db-server databases in backup-cron check for existing fields when setting/updating tablelisting-columns [CWE-352: Cross-Site Request Forgery (CSRF)] corrected validation of import-settings data to avoid injecting malicious content [CWE-94: Code Injection] 2.0.12 bugfix release fix wrong function-defintion/call in Nginx cron fix setting/resetting table-column preferences 2.0.13 maintenance release keep search-fields/text in pagination links of displaying a search-result specify clearly which tls settings are being overwritten/ignored depending on the 'Override system TLS settings' flag when adding/updating Domains type-safe comparsion of md5-compatibility hash-validation [CWE-305: Authentication Bypass by Primary Weakness] fix email-domain navigation and descriptions update dependencies 2.0.14/2.0.15 maintenance release use correct parameter in PowerDNS::cleanDomainZone(), fixes #1104 add 'Passing HTTP AUTH BASIC' header option when using FCGID require php-gd extension for better/secure validating uploaded images add Spanish language (#1105) avoid socket length limitations leading to cut-off/invalid filename for very long domain and/or loginnames, fixes #1108 corrected checkLocalGroup() validation if setting did not change, fixes #1111 open newsfeed-links in a new tab, fixes #1112 fix incorrect indexed array sorting in case of FTP-domain-usernames; fixes #1114 add certificate metadata to db table to allow filter/sort of 'Issuer', 'Valid from' and 'Valid until' properties correctly retriggered certificate issue on froxlor-vhost alias-domain changes, fixes #1115 2.0.19 maintenance release don't run cron tasks if requirements return non-success; fixes #1122 respect no-try_files setting also in protected directories put php-fpm directives in Directory-directive in apache2; fixes #1120 strictly check whether field to select is the id or the email-address b/c is cases of email-addresses starting with a digit this is somehow used as value for the id field and return the wrong entity fix adding mysql-server to customers without any prior assigned mysql-server, fixes #1123 fix issues with displaying set value if path-mode is 'dropdown' trigger rebuild of config files after changing only ip-settings in domains add copy-system-details-to-clipboard button on admin dashboard; fixes #1126 Allow admins to edit openbasedir_path for domains (#1125) set default value of 'openbasedir_path' to 0 in SubDomain.add() like we do in Domains.add() set default value for email_quota to settings-default in EmailAccounts.add(); fixes #1132 Disable autocomplete on 2FA input element (#1133) introduce http-request rate-limit 2.0.20 maintenance release Fix typo in English privileged_passwd by @n-thumann in #1136 Fix IPv6 address in cookie domain by @n-thumann in #1137 Add same loginfail restrictions for entering 2fa code as for user/pwd login Remove superfluous try_files in nginx config if php-backend (non-fastcgi) is used Fix missing idna encode adding/editing email-account/email-forwarder Secure filename of local-archive in webupdate Show 0 value of resource-fields if value is empty, fixes #1149 Re-enable fcgid/php-fpm activation-validate-check 2.0.21 maintenance release Correcting Nginx location match, fixes #1153 remove hidden fields from login/passwd-reset; refs #1102 adjust log-levels in API methods exclude password fields from being filtered/escaped by AntiXSS, fixes #1150 Fix typo in pathDescriptionSubdomain; #1156 validate generated config-json parameter string 2.0.22 maintenance release [API] validate non-empy admin-name in Admins.update() [API] fix optional-flag for IpsAndPorts.add() and IpsAndPorts.update() rework path to certificates non-ecc/ecc, regardless of current setting adjust proftpd config for debian 12 bookworm correctly redirect to last-page if session is timed out and remove passing script/qrystr url parameters correct validation of hostingplan name and description add config-diff CLI Command; #1168 2.0.23 bugfix release [API] validate non-empy admin-name in Admins.update() [API] fix optional-flag for IpsAndPorts.add() and IpsAndPorts.update() rework path to certificates non-ecc/ecc, regardless of current setting adjust proftpd config for debian 12 bookworm correctly redirect to last-page if session is timed out and remove passing script/qrystr url parameters correct validation of hostingplan name and description add config-diff CLI Command by @bashgeek in #1168 2.0.24 maintenance release fix API permission error in navigation when customer-hide-options include 'domains'; fixes #1183 fix vhost-cleaning regex for nginx-location directives; fixes #1185 added catalan language NOTE: This is the last release in the 2.0 series. Stay tuned for announcements about froxlor-2.1 See also our Migration Guide for more information. We hope you enjoy froxlor 2.0 and look forward to your feedback. Download: 2.0 | website Documentation at https://docs.froxlor.org/. Visit https://www.froxlor.org and join our Discord channel (https://discord.froxlor.org) for support, help, participation or just to chat Thank you, the froxlor team
    1 point
  31. Also ich kann zumindest bestätigen dass es nun mit PHP 8.2 nun auch wieder problemlos läuft.
    1 point
  32. Thank you for this revamp, Froxlor looks so good now! The darkmode is a blessing to my tired eyes. Everything worked flawlessly, even the change of the ACME path (I had /var/www/froxlor before and it auto-changed it to /var/www/html/froxlor with one manual command. Had me frightened for a bit but it worked).
    1 point
  33. Ich möchte einfach mal Danke sagen ! Die Installation der neuen Version ist um Lichtjahre "bequemer" als bei der Alten ! Weitere Erfahrungen kommen dann später - aber die Installation war schon mal sehr gut Andreas
    1 point
  34. I meant that as a compliment being the only thing I had to do following the migration guide which I re-read several times
    1 point
  35. Bravo! 👏👏👏👏 I had no idea that you're working on Froxlor revamp. It's been a nice surprise. Thank you! For the moment I just upgraded one of the two servers, the one with less services just in case. The only thing I had to do was commenting out the default_pass_scheme = CRYPT option Kudos to all the team @d00p P.D. I'm just curious about the new path to /var/www/html/ . Why of that change? Nevermind I see that that it was a frequent request https://github.com/Froxlor/Froxlor/issues/1068
    1 point
  36. 1 point
  37. Nachdem mir das auch gerade auf die Füße gefallen ist wollte ich nur kurz danke sagen! Spitzen Support seit Jahren.
    1 point
  38. 1 point
  39. joo, das wars. ich habe immer nur die vhost einträge geändert. Lösung: Eintrag in SSL Vhost und "Nicht-SSL vHost-Einstellungen in SSL-vHost inkludieren:" auswählen.
    1 point
  40. Danke für den Hinweis! Ich habs vollkommen verpeilt, liegt wohl an der Hitze 😁
    1 point
  41. Bin da auch gerade drübergestolpert. Das war ein Bug in acme.sh und wurde inzwischen gefixt: https://github.com/acmesh-official/acme.sh/issues/4069 Grüße nachtgeist
    1 point
  42. Es war php8.1-fpm enabled in der apache2 conf. Ein a2disconf php8.1-fpm und der Spuk war vorbei! Danke d00p
    1 point
  43. Basically you take a certificate that matches the server name. If your Froxlor installation is in operation under a domain, you take the certificate from it, but the installation should also match the server name.
    1 point
  44. Ja, da haben wir dann aber ein Henne-Ei-Problem, denn manche Sachen kann ich erst konfigurieren wenn sie installiert sind...
    -1 points
  45. Hör zu, Du sagst es ist wurscht. Ich hab aber nichts verstellt und laboriere schon Monate mit diesem Problem rum und habe bisher keine Lösung gesehen. Fakt ist dass der Webserver mit dem falschen Befehl nicht neu startet! Also is es nicht wurscht was Du als default definiert hast weil ich das dann nachprüfen kann! Was ist jetzt der default-Wert? Und warum werden die Optionen bei nginx-Befehlen nicht akzeptiert?
    -1 points
  46. This is taking too long. I'm going to use hestia instead.
    -1 points


×
×
  • Create New...